I am looking for a 2.5" aluminium intercooler piping kit for the EG, but so far i have only found a kit at Full Race for about $500

Who else sells such kits?

 

https://honda-tech.com/zerothread?id=1079925

 

pipes are 2.5 inch tig welded. mandrel bent.mild steel. uncoated.

for Curtisbeef, READ!

I know 'cause I asked when I placed my order for my mani and DP combo. Would also like to know. There's a guy in NJ and in MD also making charge pipe kits but all are made from steel .

 

http://www.kteller.com/store/i...6_112

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Lucky925l &raquo;</TD></TR><TR><TD CLASS="quote">
http://www.kteller.com/store/i...6_112</TD></TR></TABLE>

Thanks for the link, but that's not a kit

 

Sorry, I missed the part where you asked for a kit.
If full-race makes a kit you would be safe with them, great products and customer service. Otherwise you might be best to buy seperate pieces and build your own, that way you know it will fit the way you want it too.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Laserjock &raquo;</TD></TR><TR><TD CLASS="quote">pipes are 2.5 inch tig welded. mandrel bent.mild steel. uncoated.

for Curtisbeef, READ!

I know 'cause I asked when I placed my order for my mani and DP combo. Would also like to know. There's a guy in NJ and in MD also making charge pipe kits but all are made from steel .</TD></TR></TABLE>


Ya dont be a dick.... he will make you a alluminium kit for 150 more so STFU

 

shipping to germany is what is going to affect the price, because of the shipping charges to germany

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by oxSLEEPERxo &raquo;</TD></TR><TR><TD CLASS="quote">shipping to germany is what is going to affect the price, because of the shipping charges to germany</TD></TR></TABLE>

Shipping is not the issue, i will have it shipped with other parts.

Currently i have the RevHard pipes, they are 2", 2.25" and the upper charge pipe is 2.5".

But 2" (50mm) from the GT35R to the Precision 600HP intercooler is pretty ghey

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Andre &raquo;</TD></TR><TR><TD CLASS="quote">

But 2" (50mm) from the GT35R to the Precision 600HP intercooler is pretty ghey

</TD></TR></TABLE>

I agree, 2.5 at least

 

whoooo, touchy-touchy! if you knew that info beforehand why not say so. Let me help you get your panties untangeld and I apologise. but leave the namecalling to the 14 year olds.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Curtisbeef &raquo;</TD></TR><TR><TD CLASS="quote">


Ya dont be a dick.... he will make you a alluminium kit for 150 more so STFU</TD></TR></TABLE>

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Curtisbeef &raquo;</TD></TR><TR><TD CLASS="quote">
Ya dont be a dick.... he will make you a alluminium kit for 150 more so STFU</TD></TR></TABLE>

He says only mild steel, where do you have that info from?

 

Talk to him

 

I bought inline pro and it didn't fit very well

 

We will have set ready within the next few weeks here. If pressed, we could do a one-off by the end of next week. PM me for any details if interested.

 

I aked Phil aka http://SpoolinPerformance.com about making this in aluminum. his response below.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by project dc2 &raquo;</TD></TR><TR><TD CLASS="quote">i can make them in aluminum but itll be a substantial price increase. </TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Laserjock &raquo;</TD></TR><TR><TD CLASS="quote">like how much? i know aluminum pipe stock is more expensive than steel. and welding rod/wire will be different...</TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by project dc2 &raquo;</TD></TR><TR><TD CLASS="quote">
also the process. itll be 400$ shipped </TD></TR></TABLE>

The for sale thread: https://honda-tech.com/zerothread?id=1079925&page=5

So this would be a substantial saving from the Full Race setup. Shipping would have to be extra for you overseas guys. Oh, BTW no affiliation to http://SpoolinPerformance.com, yada, yada. I like good product and good prices and that was enough to convince me to order his mani and Dp combo. and I tend to support the "little" guy.

My very public apology to Curtisbeef. I'm here to learn and get good info. My pet peeves are jokers who post incorrect info and use machismo to cover up their lack of knowledge.

 

quote]But 2" (50mm) from the GT35R to the Precision 600HP intercooler is pretty ghey[/quote]

So you have a kit which was actually engineered, and you doubt it simply because most custom pipes (which have about zero engineering) are larger?

I'd stick with the RevHard. Nobody needs 2.5" or 3" intercooler pipes unless those pipes happen to be on a 6.0 liter engine.

 

does it matter steel or alumninum

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by beepy &raquo;</TD></TR><TR><TD CLASS="quote">So you have a kit which was actually engineered, and you doubt it simply because most custom pipes (which have about zero engineering) are larger?
</TD></TR></TABLE>

I have pieced the kit together, it's not a RevHard kit.
The piping was a mispurchase.