Search didn't help out much here. Question is: What is the limit of hp/tq that 5spd. stock accord axles can take with the h22. Future plans are lsd with turbo and goal is 300-400whp on 10-15psi.

 

no limit, Ive snapped 1 at 314whp launching on slicks

But theres a 2001 K20-T on here built to ****, 500+whp running stockers and there fine with launching on slicks with all that power

I wouldnt worry about them

 

it all depends on wheel hop....how hard your launching....how big a slick your running....yada yada yada

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JAY &raquo;</TD></TR><TR><TD CLASS="quote">it all depends on wheel hop....how hard your launching....how big a slick your running....yada yada yada</TD></TR></TABLE>

Yep it depends how you drive.

 

forgot to mention. this will be a daily driver and not see a whole lot of track time. I assume I would still be okay correct.

 

its all luck if you ask me.....

I am runnin stock axles....

 

stock 90-93 integra axles on H22 with 70 shot and 24.5x8x13 slicks launching off the line at 6000rpm. hasnt broken yet after half a year's run at the track.

stock integra axles on old turbo setup of 570whp and ran for half a year with 26x8x15 slicks and no axle problems. now at 629whp.

 

it depend how you drive... mine never break with 335 whp with slicks.... on my D