Injector Dynamics ID2000 injectors are here!!
Thread Starter
Honda-Tech Member
Joined: May 2002
Posts: 15,814
Likes: 8
From: Dallas, TX, USA
Injector Dynamics ID2000 injectors are here!!
Finally, a great solution for people that need more than 1500cc/min!!
The new Injector Dynamics ID2000 flows 2200cc/min at 3 bar (43.5psi) and is high impedance.That means no injector resistor or injector driver is needed.With the capability of running up to 130psi and flowing 3700cc/min, the needs for running multiple injectors per cylinder are gone on all but the most demanding methanol applications. Each injector includes the necessary adaptor top and electrical connector.The adaptor tops mechanically lock to the injector and also incorporate a 7 micron replaceable filter.
With the most linear flow in it’s class, great atomization and full injector dead time information provided, there really is no competition for the ID2000.Check out this video to see how well they run in a worst case scenario, a bone stock 120hp car!
To order click on the link http://www.t1raceparts.com/product_p/id%202000.htm
Visit http://www.injectordynamics.com/ID2000.html for more information.
Thread
Thread Starter
Forum
Replies
Last Post
