thats to bad all i got is rc 750's when u got down and get gas i wanna go so i can get my 110 gallons to

 

Haha i remeber that kid!! Me and tyler see him in auto zone one3 day in waterville, he said he had a z6 in a geo metro too! lol WTF

 

hahaha colby idk man i guess u should have kept it haha kids these days

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by faxshatch &raquo;</TD></TR><TR><TD CLASS="quote">Haha i remeber that kid!! Me and tyler see him in auto zone one3 day in waterville, he said he had a z6 in a geo metro too! lol WTF</TD></TR></TABLE>

haha your talking about the del sol and civic kid??

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hondaracer6926 &raquo;</TD></TR><TR><TD CLASS="quote">hahaha colby idk man i guess u should have kept it haha kids these days </TD></TR></TABLE>

Same thing with a ricer aroun here told us he had a b18c1 and we pop his hood z6FTL

 

soo far only parts i know i want so far is the manifold form lovefab and
http://lovefab.com/html/h_excaliber.html
gt2876r
http://www.turbobygarrett.com/...2.htm


i just want 450 hp range

 

Yea thats the one. z6 in a geo

 

For a turbo setup.

I would love to but it is to expensive for me right now so probily going to do some nitrous

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Colby71 &raquo;</TD></TR><TR><TD CLASS="quote">

Same thing with a ricer aroun here told us he had a b18c1 and we pop his hood z6FTL</TD></TR></TABLE>

you should have been like lets line them up and race for pinks..


then you would be like byby

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by subydoored &raquo;</TD></TR><TR><TD CLASS="quote">soo far only parts i know i want so far is the manifold form lovefab and
http://lovefab.com/html/h_excaliber.html
gt2876r
http://www.turbobygarrett.com/...2.htm</TD></TR></TABLE>

dude that thing is soooo [freak]ing sexy! i want one just to lay in bed with at nite!! haha what u going with pistons mahle or however you spell it/

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by faxshatch &raquo;</TD></TR><TR><TD CLASS="quote">Yea thats the one. z6 in a geo</TD></TR></TABLE>

haha thats funny

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hondaracer6926 &raquo;</TD></TR><TR><TD CLASS="quote">

you should have been like lets line them up and race for pinks..


then you would be like byby

dude that thing is soooo [freak]ing sexy! i want one just to lay in bed with at nite!! haha what u going with pistons mahle or however you spell it/</TD></TR></TABLE>


I was going to race him with my b7. He will not race anyone unless they have a smaller motor lol. but he sucks at driving so prob would of won. we was going out to race and 2 state cops flue past us with there blues on so we chickend out.

 

ya mahle gold series not sleeving it no need those are forge and e85 burns cooler i found an article in ht guy was run 200 cooler on the exhaust side and 15 degrees on intake side. also found ton people during tuning was advancing the ingition timing 4 degrees giving it the more torque

 

the cops suck we need private highway to race one lol

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by subydoored &raquo;</TD></TR><TR><TD CLASS="quote">ya mahle gold series not sleeving it no need those are forge and e85 burns cooler i found an article in ht guy was run 200 cooler on the exhaust side and 15 degrees on intake side. also found ton people during tuning was advancing the ingition timing 4 degrees giving it the more torque</TD></TR></TABLE>

NO sleeve's? what are you using for rings. I have herd about forged without sleeving but never herd anything succesful.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Colby71 &raquo;</TD></TR><TR><TD CLASS="quote">


I was going to race him with my b7. He will not race anyone unless they have a smaller motor lol. but he sucks at driving so prob would of won. we was going out to race and 2 state cops flue past us with there blues on so we chickend out.</TD></TR></TABLE>

oh well right you'll get him next time. hows the rust repair going loving it yet?


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by subydoored &raquo;</TD></TR><TR><TD CLASS="quote">ya mahle gold series not sleeving it no need those are forge and e85 burns cooler i found an article in ht guy was run 200 cooler on the exhaust side and 15 degrees on intake side. also found ton people during tuning was advancing the ingition timing 4 degrees giving it the more torque</TD></TR></TABLE>

i wanna get some to b.c u know me i love da boost when you think your gna do this all and to what motor the one your getting of us?


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by subydoored &raquo;</TD></TR><TR><TD CLASS="quote">the cops suck we need private highway to race one lol</TD></TR></TABLE>

you know how sweeet that would just be

 

mahle gold series have a special coating on the skirts to prevent scaring of th cfm lining they make thm for 11.5, 10, and 9 to 1 setup only i would do is get the block honed.

 

and yes the engine buying off you and bruce is going to be my turbo project

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hondaracer6926 &raquo;</TD></TR><TR><TD CLASS="quote">

oh well right you'll get him next time. hows the rust repair going loving it yet?
</TD></TR></TABLE>

It is going so slow! I have not got a chance this week becues school has been gay but it only has like 2 or 3 days untill I get that side welded up.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Colby71 &raquo;</TD></TR><TR><TD CLASS="quote">

It is going so slow! I have not got a chance this week becues school has been gay but it only has like 2 or 3 days untill I get that side welded up.</TD></TR></TABLE>


oh yeah theres alot of work involed in doing rust. i do all the rocker panels cab corners at our shop and its a process takes time!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hondaracer6926 &raquo;</TD></TR><TR><TD CLASS="quote">


oh yeah theres alot of work involed in doing rust. i do all the rocker panels cab corners at our shop and its a process takes time!</TD></TR></TABLE>

Yea alot of it is just becues it is at school I could of had it done in a weekend if it was not for getting like 3 hours every other day mon-fri. it sucks!

 

when you think its gonna be painted? i'm looking for a cheap beater right now so i can start working on my car again i hate lil dings here and there and i got a dent now where my g.f opend the door into tylers door haha fun i need a hood two fenders two door skins and we should be golden but i also need money haha

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hondaracer6926 &raquo;</TD></TR><TR><TD CLASS="quote">when you think its gonna be painted? i'm looking for a cheap beater right now so i can start working on my car again i hate lil dings here and there and i got a dent now where my g.f opend the door into tylers door haha fun i need a hood two fenders two door skins and we should be golden but i also need money haha</TD></TR></TABLE>

I am going to say the end of may. But dont hold me to it.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Colby71 &raquo;</TD></TR><TR><TD CLASS="quote">

I am going to say the end of may. But dont hold me to it.</TD></TR></TABLE>

dude i can't wait to see it i love riding around with a whole bunch of hondas

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by subydoored &raquo;</TD></TR><TR><TD CLASS="quote">and yes the engine buying off you and bruce is going to be my turbo project</TD></TR></TABLE>

hahah sweet man, so you coming up friday nite right? we should have it done by sat like 9 in the moring then time to sleep!

 

Wow, so I got frustrated and went and slammed the [freak] out of my starter with a hammer, and it came loose.. lol. I cant believe the amount of force that took!

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Colby71 &raquo;</TD></TR><TR><TD CLASS="quote">
93CX did you do any dignosing befor you accused the starter Just wondering. and what is clicking is it the starter.</TD></TR></TABLE>

I threw another battery in and it did the same thing, but other than that nope just wildly accusing the starter. I'm gonna go snag one at Napa tomorrow and hopefully that fixes it