Wiring v-tec for a b16 in a 1991 si crx
11-05-2003, 01:43 PM
#2
Honda-Tech Member
Join Date: Jun 2002
Location: Emo land, Utah, USA
Posts: 1,235
Likes: 0
Received 0 Likes
on
0 Posts
Re: Wiring v-tec for a b16 in a 1991 si crx (SirCRX)
first man it's VTEC, here's one of katmans pics
if that doesn't work go to http://www.imagestation.com/pi...g.jpg
if that doesn't work go to http://www.imagestation.com/pi...g.jpg
11-05-2003, 10:56 PM
#3
Honda-Tech Member
Join Date: Mar 2002
Location: washington state
Posts: 1,148
Likes: 0
Received 0 Likes
on
0 Posts
Add a wires for vtec pressure.b5
Add a wire for vtec solenoid. a8
Add a wire for 2nd o2 sensor. c8
Add a wire for knock sensor. b19
Heres a pinout: http://tech2.hybridgarage.com/...pr3_a
Add a wire for vtec solenoid. a8
Add a wire for 2nd o2 sensor. c8
Add a wire for knock sensor. b19
Heres a pinout: http://tech2.hybridgarage.com/...pr3_a
Thread
Thread Starter
Forum
Replies
Last Post
ExodusJKD
Honda CRX / EF Civic (1988 - 1991)
2
08-05-2005 07:57 AM
juicy.koreans.suck
Hybrid / Engine Swaps
4
12-26-2001 09:34 AM
juicy.koreans.suck
Honda CRX / EF Civic (1988 - 1991)
1
12-25-2001 01:54 PM