Will ITR spindle fit on non-ITR Integra knuckle/trailing arm?
#1
Thread Starter
Join Date: Sep 2003
Location: Belmar, NJ, US
Posts: 728
Likes: 0
Received 0 Likes
on
0 Posts
Will ITR spindle fit on non-ITR Integra knuckle/trailing arm?
I currently have an eg with 95 ls brakes front and rear. I'm trying to find out if the spindle from a 97 jdm ITR will fit correctly on my current set up: will the front ITR spindle attach to the non-ITR front steering knuckle? will the rear ITR spindle attach to the rear trailing arm?
Let me know if there are any conflicting issues with this swap, thanks.
Also, were 97 jdm ITRs 4 or 5 lug?
Let me know if there are any conflicting issues with this swap, thanks.
Also, were 97 jdm ITRs 4 or 5 lug?
#3
Thread Starter
Join Date: Sep 2003
Location: Belmar, NJ, US
Posts: 728
Likes: 0
Received 0 Likes
on
0 Posts
Re: Will ITR spindle fit on non-ITR Integra knuckle/trailing arm? (B16B)
i mean swapping the knuckles or trailing arms and everything attached. the hub is part of this, but it also has the caliper brackets, calipers, etc attached.
#4
Honda-Tech Member
Join Date: Jan 2002
Location: 3IRE
Posts: 2,422
Likes: 0
Received 0 Likes
on
0 Posts
Re: Will ITR spindle fit on non-ITR Integra knuckle/trailing arm? (jlsmi2)
yes, it bolts right on. front and rear. I have a spare ITR 4x114 conversion if you are interested
Thread
Thread Starter
Forum
Replies
Last Post
xlasianizelx
Northern California (Sales)
4
01-23-2010 02:20 PM
the_illest_soldier
Acura Integra Type-R
5
04-03-2005 10:28 PM