who has ever ordered a motor from mark gearhart, the owner of jdmclub.com??
05-12-2003, 10:26 AM
#2
Re: who has ever ordered a motor from mark gearhart, the owner of jdmclub.com?? (pwr5hift27)
hahahahahah
you have missed the neverending threads about that guy!
btw i DID order 2 swaps from him a while back, here is what one of teh tranny's looked like inside:
you have missed the neverending threads about that guy!
btw i DID order 2 swaps from him a while back, here is what one of teh tranny's looked like inside:
05-12-2003, 12:39 PM
#3
Honda-Tech Member
Re: who has ever ordered a motor from mark gearhart, the owner of jdmclub.com?? (v4lu3s)
Ok where to start? First of let me say that although my experience wasnt the least bit good with mark, and i had to threaten him with my lawyer (my uncle), I did however get a good engine from him, BUT just by luck.
Here's the lowdwn:
Mine took almost 4 months to get here when Mark had originally said two weeks.
No shift linkage, axels, or intermidiate shaft came with the engine like stated. My header down pipe was smahed, I didnt get lsd which i had ordered, but that was later resolved.
I was one of the lucky ones might i remind you so take your chances if you want, but my advice would be to NEVER buy something used you cant physically look at first! I know i never will again.
Here is just one of the never endine post created about MARK and jdmclub......check it out, going on about 12 pages now!
https://honda-tech.com/zerothread?id=447987
-last words.......if you wish to buy a motor online, you would be better off with HMO or IAS, it might be a little more expensive, but its worth saving the headache when you actually get the motor. Mark is still trying to work on paying people back and giving them their motors because of this guy Andrew that dicked him over like 24,000 dollars, so this is not the best time for mark right now in mine and many other opinions.
Here's the lowdwn:
Mine took almost 4 months to get here when Mark had originally said two weeks.
No shift linkage, axels, or intermidiate shaft came with the engine like stated. My header down pipe was smahed, I didnt get lsd which i had ordered, but that was later resolved.
I was one of the lucky ones might i remind you so take your chances if you want, but my advice would be to NEVER buy something used you cant physically look at first! I know i never will again.
Here is just one of the never endine post created about MARK and jdmclub......check it out, going on about 12 pages now!
https://honda-tech.com/zerothread?id=447987
-last words.......if you wish to buy a motor online, you would be better off with HMO or IAS, it might be a little more expensive, but its worth saving the headache when you actually get the motor. Mark is still trying to work on paying people back and giving them their motors because of this guy Andrew that dicked him over like 24,000 dollars, so this is not the best time for mark right now in mine and many other opinions.
05-12-2003, 01:16 PM
#4
Re: who has ever ordered a motor from mark gearhart, the owner of jdmclub.com?? (pwr5hift27)
DO NOT order anything from JDMCLUB.
He has got to be one of the worse businessmen in the honda world.
Do a search on JDMCLUB and you will see what I mean.
I would rather put $4000 on Double Zeros then give Mark 1 penny.
If you are seriously considering buying a motor from Mark/JDMclub
Read these threads
https://honda-tech.com/zerothread?id=231927
https://honda-tech.com/zerothread?id=447987
You might as well deal directly with OSAKA Motors since that is where Mark seems to be getting his swaps from these days. But I wouldn't give Osaka the time of day either.
He has got to be one of the worse businessmen in the honda world.
Do a search on JDMCLUB and you will see what I mean.
I would rather put $4000 on Double Zeros then give Mark 1 penny.
If you are seriously considering buying a motor from Mark/JDMclub
Read these threads
https://honda-tech.com/zerothread?id=231927
https://honda-tech.com/zerothread?id=447987
You might as well deal directly with OSAKA Motors since that is where Mark seems to be getting his swaps from these days. But I wouldn't give Osaka the time of day either.
05-12-2003, 01:18 PM
#5
Senior Member
Re: who has ever ordered a motor from mark gearhart, the owner of jdmclub.com?? (tonyXcom)
LOL. Look for one of my threads a LONG time ago.
Actually, I found it for you.
https://honda-tech.com/zerothread?id=231927
Actually, I found it for you.
https://honda-tech.com/zerothread?id=231927
05-12-2003, 01:22 PM
#6
Senior Member
Re: who has ever ordered a motor from mark gearhart, the owner of jdmclub.com?? (poison)
lol. how is it with every thread with jdmclub you find it asap tony? 
05-12-2003, 01:22 PM
#7
Re: who has ever ordered a motor from mark gearhart, the owner of jdmclub.com?? (poison)
hahah. Couldn't tell you.
Trending Topics
05-12-2003, 01:55 PM
#10
Honda-Tech Member
Re: (poison)
bought his turbo setup and got screwed on it....
had to drive down to orlando, cause he "couldnt get a box for the downpipe"
thank god my GF at the time, was at UCF and made the trip more then worth it~
had to drive down to orlando, cause he "couldnt get a box for the downpipe"
thank god my GF at the time, was at UCF and made the trip more then worth it~
05-12-2003, 02:00 PM
#11
Re: (KTeller8)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by KTeller8 »</TD></TR><TR><TD CLASS="quote">
cause he "couldnt get a box for the downpipe"
</TD></TR></TABLE>
holy ****, that is probably the most rediculous thing I have heard about his business practices yet.
cause he "couldnt get a box for the downpipe"
</TD></TR></TABLE>
holy ****, that is probably the most rediculous thing I have heard about his business practices yet.
05-12-2003, 02:05 PM
#12
Senior Member
Re: (KTeller8)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by KTeller8 »</TD></TR><TR><TD CLASS="quote">
had to drive down to orlando, cause he "couldnt get a box for the downpipe"
</TD></TR></TABLE>
wtf? that is lamer than my situation right there.
had to drive down to orlando, cause he "couldnt get a box for the downpipe"
</TD></TR></TABLE>
wtf? that is lamer than my situation right there.
05-12-2003, 06:41 PM
#14
Re: (poison)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by poison »</TD></TR><TR><TD CLASS="quote">check out jdmclubsucks.com as well.</TD></TR></TABLE>
LOL.... I remember when Jeff was telling me about that all when it was happenning to him (right after he test drove my H22 Civic at Buttonwillow, which convinced him on going H22 than rebuilding his sweet ITR setup in his EG hatch
). Then the other one about not having a box to send the downpipe.... wow 
.
LOL.... I remember when Jeff was telling me about that all when it was happenning to him (right after he test drove my H22 Civic at Buttonwillow, which convinced him on going H22 than rebuilding his sweet ITR setup in his EG hatch
). Then the other one about not having a box to send the downpipe.... wow .
05-13-2003, 02:45 PM
#18
Re: (pwr5hift27)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by pwr5hift27 »</TD></TR><TR><TD CLASS="quote">did you pay your order in the full amount before you received your motor???</TD></TR></TABLE>
that is what mark requires since he doesn't have any of his own money to order anything for his customers.
that is what mark requires since he doesn't have any of his own money to order anything for his customers.
05-13-2003, 06:42 PM
#19
Who?
Join Date: Dec 2000
Location: NJ
Posts: 4,910
Likes: 0
Received 0 Likes
on
0 Posts
Re: (tonyXcom)
As quote from Poisons thread about JDMclub (Which i believe was the first of way too many.)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Markaccord95 »</TD></TR><TR><TD CLASS="quote">this is by far not my problem, it was everyone elses in the process.</TD></TR></TABLE>
This seems to be Marks attitude with every one of his unsatisfied customers...
Modified by JV at 11:00 PM 5/13/2003
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Markaccord95 »</TD></TR><TR><TD CLASS="quote">this is by far not my problem, it was everyone elses in the process.</TD></TR></TABLE>
This seems to be Marks attitude with every one of his unsatisfied customers...
Modified by JV at 11:00 PM 5/13/2003
05-14-2003, 06:26 PM
#22
Honda-Tech Member
Join Date: Dec 2002
Location: boise, idaho, united states
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
I am still waiting to hear when they will get the motor too me. I found another car but I dont have any money as of now since this **** has happened and I have paid a ton for my attorney to rape the last guy that ripped me off 10k.
05-27-2003, 05:59 AM
#23
Honda-Tech Member
Join Date: Dec 2002
Location: boise, idaho, united states
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
Hopefully I will see some sign of the engine coming today. Probably not but there is still a .1 % chance it will happen. I need a car soon so I can start my motorcycle drivers education. I want to get a bike sometime, most likely a sporster 883 or 1200. My dad wants me to get one. I found a limited 1987 sporster xl 1100 that would be sweet. only 600 something made.
05-27-2003, 07:42 AM
#24
Honda-Tech Member
Re: (dicksonrd)
how bout getting your lawyer to drop mark a line?
maybe he will get off his *** that way
still owes me too:
i should annouce interest that way when someone gets the ***** to go after him, ill be able to file suit also
maybe he will get off his *** that way
still owes me too:
i should annouce interest that way when someone gets the ***** to go after him, ill be able to file suit also
05-27-2003, 03:28 PM
#25
Who?
Join Date: Dec 2000
Location: NJ
Posts: 4,910
Likes: 0
Received 0 Likes
on
0 Posts
Re: (vivid02)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vivid02 »</TD></TR><TR><TD CLASS="quote">jdmclubsucks.</TD></TR></TABLE>
Thread
Thread Starter
Forum
Replies
Last Post
EARLdaSQUIRREL
Honda CRX / EF Civic (1988 - 1991)
3
04-15-2003 10:41 AM