Vitara pistons + d15b crank + b7 block
#1
Vitara pistons + d15b crank + b7 block
Alright...ive been searching this for the better part of the day and haven't been able to come up with anything conclusive.
I have a d15b7 block with a d15b crank (with the d16 sized rod journals). Im gonna get the block bored to run my set of 75.5mm vitara pistons. Which rods can I run that will keep the piston from sticking out the top of the block? (and at the same time not giving me a rediculously low comp. ratio). Im wanting to boost this motor btw.
Has anyone done anything similar to this?
I have a d15b7 block with a d15b crank (with the d16 sized rod journals). Im gonna get the block bored to run my set of 75.5mm vitara pistons. Which rods can I run that will keep the piston from sticking out the top of the block? (and at the same time not giving me a rediculously low comp. ratio). Im wanting to boost this motor btw.
Has anyone done anything similar to this?
Thread
Thread Starter
Forum
Replies
Last Post
whytTypeR
Acura Integra Type-R
1
02-08-2005 06:42 PM
topsekret
All Motor / Naturally Aspirated
4
08-05-2003 08:33 PM