Type R head on gsr block?
05-16-2003, 07:54 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2002
Location: 2 LeGit
Posts: 1,169
Likes: 0
Received 0 Likes
on
0 Posts
Type R head on gsr block?
any down falls to using this setup? i have the head and ecu, will i need anything else ? i will be keeping the gsr pistons cause i have a turbo kit to throw on
05-16-2003, 08:42 AM
#2
Honda-Tech Member
iTrader: (1)
Join Date: Jun 2002
Location: Corning, NY, USA
Posts: 753
Likes: 0
Received 0 Likes
on
0 Posts
Re: Type R head on gsr block? (ASHY-ELBOW)
Beside that it is next to impossible to find. I recomend that you get a B16 head (same casting) and throw a set of type R cams in there. You will save MEGA $$ doing it that way.
Edit... You allready have the head?! slap that bad boy on there!
Edit... You allready have the head?! slap that bad boy on there!
05-16-2003, 08:55 AM
#3
Re: Type R head on gsr block? (ASHY-ELBOW)
Only other downfall would be compression lowering to around 9.8:1 cr. Check out the thread that's been going on this week about the same subject: https://honda-tech.com/zerothread?id=505787
05-16-2003, 10:44 AM
#5
Junior Member
Join Date: Apr 2001
Location: Long Island, N Y, USA
Posts: 940
Likes: 0
Received 0 Likes
on
0 Posts
Re: Type R head on gsr block? (ASHY-ELBOW)
Here try this website out. It tells you what you need for this head swap.
http://hybrid2.honda-perf.org/tech/headswap/
http://hybrid2.honda-perf.org/tech/headswap/
05-16-2003, 01:04 PM
#7
Honda-Tech Member
Thread Starter
Join Date: Mar 2002
Location: 2 LeGit
Posts: 1,169
Likes: 0
Received 0 Likes
on
0 Posts
Re: Type R head on gsr block? (CTR94Joes)
damn i have been to that site a million times and never saw that page , that is a nice piece of info
but thx for all the info guys but i am gonna go with K.I.S.S on this one the R head needed valves and seats done so i am swapping it with a friend for a complete gsr head with dist and all to make life easier
so mod u can lock this or keep it open for people interested in this kinda swap thx 
but thx for all the info guys but i am gonna go with K.I.S.S on this one the R head needed valves and seats done so i am swapping it with a friend for a complete gsr head with dist and all to make life easier
so mod u can lock this or keep it open for people interested in this kinda swap thx
Thread
Thread Starter
Forum
Replies
Last Post
