swaping a 94 gsr into 92 cx hatch??????

Reply Subscribe

Thread Tools

Search this Thread

07-09-2005, 09:42 AM

BrooksGSR

Thread Starter

Join Date: Dec 2004

Location: niskayuna, ny, schenectady

Posts: 49

Likes: 0

Received 0 Likes on 0 Posts

swaping a 94 gsr into 92 cx hatch??????

are there any tricks i need to know about wiring besides teh secoundarys?? any help would be great?

Reply Like

07-09-2005, 06:27 PM

VTECVillain

Honda-Tech Member

Join Date: Dec 2001

Posts: 4,052

Likes: 0

Received 3 Likes on 3 Posts

Re: swaping a 94 gsr into 92 cx hatch?????? (BrooksGSR)

Since you have a 92 even though it's a CX, it's still prewired for VTEC on the chassis side harness. You will need to wire up the IAB and knock sensor but the VTEC wiring will be complete if you use the GSR or any EG/DC VTEC engine harness.

Reply Like

04-07-2011, 11:13 PM

TealCivic115

Honda-Tech Member

Join Date: Nov 2009

Location: Greater Northwest

Posts: 93

Likes: 0

Received 0 Likes on 0 Posts

Re: swaping a 94 gsr into 92 cx hatch??????

damn this was a million plus years ago, but you are saying that his cx hatch is prewired for vtec on the chassis side. what does that mean? where would i find it already pre wired?

thanks

Reply Like

04-26-2011, 09:11 AM

Cynical 1

Honda-Tech Member

Join Date: Jul 2002

Location: Dahlonega, GA

Posts: 1,590

Likes: 0

Received 0 Likes on 0 Posts

Re: swaping a 94 gsr into 92 cx hatch??????

Quote:

Originally Posted by TealCivic115

damn this was a million plus years ago, but you are saying that his cx hatch is prewired for vtec on the chassis side. what does that mean? where would i find it already pre wired?

thanks

bump from the dead indeed...

the wiring for vtec is already in the car's wiring harness. it runs from the strut tower connector to the ecu - meaning you don't have to wire for vtec.