i understand that the vtec switch from the ecu is the D6 pinout... but the sensor connecting to the switch has two wires. a black and blue. is the black the ground and the blue wire the one from the ecu?? the reason im doing this is because i keep getting code 22(vtec switch) and ive changed it 3 times, so im begining to think it might be the wire or the ground. any info would be appreciated. ThanX

 

c'mon i need to fix this... i keep getting code 22's mannnnnn!!!!!!!!!

 

 

Check this out.

https://honda-tech.com/zerothread?id=919292