k series swap questions, need help
#1
Junior Member
Thread Starter
Join Date: Mar 2004
Location: Hoover, AL, United States
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
k series swap questions, need help
are the k20A2 and K24A2 intermediate shafts the same/interchangeable.
putting K24A2 with K20A2 six speed into CRX and using hasport axles. The bolt holes on the block line up correctly with the bolt holes in the bearing support of the intermediate shaft (currently have K24A2 intermediate shaft) but the hasport axle/intermediate shaft combo appears to be too long. Driver side fits like a glove, passenger side appears to be too long
putting K24A2 with K20A2 six speed into CRX and using hasport axles. The bolt holes on the block line up correctly with the bolt holes in the bearing support of the intermediate shaft (currently have K24A2 intermediate shaft) but the hasport axle/intermediate shaft combo appears to be too long. Driver side fits like a glove, passenger side appears to be too long
Thread
Thread Starter
Forum
Replies
Last Post
ThaEfSwap
Honda CRX / EF Civic (1988 - 1991)
10
03-19-2014 02:31 PM