h2b intermediate shaft help, please
#1
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Apr 2013
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
h2b intermediate shaft help, please
hello,
yet another h2b project in the works. however, i ran into a snag.
the holes on the intermediate shaft do not line up with the bracket. the intermediate shaft has the correct markings for a manual intermediate shaft of "SR3 J0" and it is in all the way into the transmission. yes, i did use all for dowel pins and torque everything to specs. the h2b bracket is the one with the nuts welded on.
attached are the 2 of the pictures.
any help would be appreciated.
thank you
yet another h2b project in the works. however, i ran into a snag.
the holes on the intermediate shaft do not line up with the bracket. the intermediate shaft has the correct markings for a manual intermediate shaft of "SR3 J0" and it is in all the way into the transmission. yes, i did use all for dowel pins and torque everything to specs. the h2b bracket is the one with the nuts welded on.
attached are the 2 of the pictures.
any help would be appreciated.
thank you
Thread
Thread Starter
Forum
Replies
Last Post
integrawow
Honda CRX / EF Civic (1988 - 1991)
2
05-26-2007 07:46 AM