CEL code 22 help....
03-23-2006, 06:39 AM
#1
Thread Starter
Join Date: Jul 2004
Location: beaverton, oregon, usa
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
CEL code 22 help....
got a b16 CEL code 22 on start up not really to sure what to do i no it could be bad VTEC solenoid valve, Bad VTEC pressure switch has oil i took the solenoid off it look alright has anyone had this problem? any ideas what to do?
03-26-2006, 07:23 PM
#4
Honda-Tech Member
If you have replaced the oil pressure switch, then its probably a bad connection somewhere.
Check the connector at the switch, then check the pin at the ecu.
Check the connector at the switch, then check the pin at the ecu.
03-27-2006, 10:04 AM
#6
Member
Join Date: Aug 2005
Location: L0NG BEACH, CA
Posts: 2,591
Likes: 0
Received 0 Likes
on
0 Posts
Re: (lshatch92)
You'll need to ground the vtec pressure switch wire, or just connect it to the vtec solenoid pin out, btw what kinda car you have? it would help more and also what obd ecu?
Thread
Thread Starter
Forum
Replies
Last Post
mister2racer
Honda Civic / Del Sol (1992 - 2000)
10
07-01-2005 08:14 PM