CEL 14 JDM B16a2 in a 5th gen civic
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2002
Location: The Mitten, USA
Posts: 1,369
Likes: 0
Received 0 Likes
on
0 Posts
CEL 14 JDM B16a2 in a 5th gen civic
Alright guys help me out I'm getting a CEL 14 on my engine. Car seems to idle fine. Haven't taken it out to check it out. Did I hear this is the IAC on the back of the manifold?
The old thing is it's not getting a MAP one as well so I'm pretty sure I have the plugs in correct as these two share the same type.
Any idea's besides pulling the IAC off and checking it. As the car seems to run fine and not fluctuate. But alais I have the CEL.
Thanks for the help guys!
The old thing is it's not getting a MAP one as well so I'm pretty sure I have the plugs in correct as these two share the same type.
Any idea's besides pulling the IAC off and checking it. As the car seems to run fine and not fluctuate. But alais I have the CEL.
Thanks for the help guys!
#2
Honda-Tech Member
Thread Starter
Join Date: Jun 2002
Location: The Mitten, USA
Posts: 1,369
Likes: 0
Received 0 Likes
on
0 Posts
Re: CEL 14 JDM B16a2 in a 5th gen civic (DX Hybridizer)
Even though not a single person helped me.
I got it figured out last night. I had been lazy and net setup the vtec pressure valve? I know the name is right I think it's something purge actually.
Anyways I wired that up and the check engine light went away. So maybe someone doing a search can get benefit here were I didn't.
Now I have a 45 minute drive open header to the new house. YIKES!
I got it figured out last night. I had been lazy and net setup the vtec pressure valve? I know the name is right I think it's something purge actually.
Anyways I wired that up and the check engine light went away. So maybe someone doing a search can get benefit here were I didn't.
Now I have a 45 minute drive open header to the new house. YIKES!
Thread
Thread Starter
Forum
Replies
Last Post
MrXclusivE
Honda Civic / Del Sol (1992 - 2000)
11
01-14-2010 01:15 PM