Building a y7/y8 HC mini me
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2005
Location: Erie, PA
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
Building a y7/y8 HC mini me
I was wondering what type of pistons i would need to boost my CR to about 10.5,
I would be using a y7 block and a y8 head, i was thinking pm3 or pm6 pistons. My plans would be to eventually high comp. with low boost like 3-4 lbs. with stock internals. But of couse i would upgrade rods when i were to do the mini me swap. Also maybe a cam until i get a turbo set up. What would be the safest bet on the pistons? I did the comp calc with y8 specs, and was able to ge ta 10.3 and an 11.1 comp ratio. An 11.1 i think would be a bit much. What do you all think??
I would be using a y7 block and a y8 head, i was thinking pm3 or pm6 pistons. My plans would be to eventually high comp. with low boost like 3-4 lbs. with stock internals. But of couse i would upgrade rods when i were to do the mini me swap. Also maybe a cam until i get a turbo set up. What would be the safest bet on the pistons? I did the comp calc with y8 specs, and was able to ge ta 10.3 and an 11.1 comp ratio. An 11.1 i think would be a bit much. What do you all think??
Thread
Thread Starter
Forum
Replies
Last Post
Burke
Tech / Misc
2
10-13-2004 01:44 PM