B18c4 in ej9 vtec spool solenoid
#1
B18c4 in ej9 vtec spool solenoid
Just wondering if anyone can help me, I have just finished a b18c4 conversion on my ej9, I have done quite a few swaps before and never had any problems, I have code 20 for vtec spool solenoid so obviously I have no vtec and also my idle is at around 1200rpm constant even when warm, I have checked and have no air leaks and throttle cable isn't too tight. Vtec solenoid clicks when I put 12v to it, run a wire straight from solenoid to the ecu pin out and still engine light is on. Running a p28 with h tune basemap
Thread
Thread Starter
Forum
Replies
Last Post
2slow4stock
Honda CRX / EF Civic (1988 - 1991)
17
04-26-2007 04:45 PM