ryanplayjoint

I have the oppurtunity to buy a gsr head off this kid's siezed gsr at a very attractive price. I was just wondering if the head could still be good. The engine siezed in third gear. The thing I am most concerned about is the camshaft bearings and if they are worn out of spec. Drop a line tell me what you think? thanks

ensracer

well you are going to find out as soon as you pull it off......also who knows if some valves could have been bent but thats the small stuff...

97mini-me

Somebody correct me if I am wrong, but I thought the cams rode on the head....no bearings for the cams. At least, my friend's b16 did. ???

Muckman

iTrader: (2)

No bearings, just journals. Not repalaceable.

Why did the engine sieze? Oil starvation? Only way to be sure is to take the cams out and check the cam journals.

ryanplayjoint

yeah your right they ride on the head/bearing surface thats why I am most concerned.

ryanplayjoint

yeah oil starvation, but I was hoping that the crank welded to the mains before any real damage could occur to the head. I'll rip it off and post back w specs and some pics.

Muckman

iTrader: (2)

When you say siezed up do you mean it physically wont crank over at all? Youd have to run a motor into the ground to get it to that stage. Thats gotta be well past the spun bearing stage.

93H22ACX

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ryanplayjoint &raquo;</TD></TR><TR><TD CLASS="quote">I have the oppurtunity to buy a gsr head off this kid's siezed gsr at a very attractive price. I was just wondering if the head could still be good. The engine siezed in third gear. The thing I am most concerned about is the camshaft bearings and if they are worn out of spec. Drop a line tell me what you think? thanks</TD></TR></TABLE>

why not pull the head off before buying it?

agrabau

The head will starve for oil before the block will. I would guess that the head is more damaged than the block. Stay away.