i have a 1990 ef with a ls motor and i have the cable trans and supposedly a hydro clutch in it is this possible and is this safe

 

I don't think it'll fit.

You have to use what was made for the tranny.
Hydro to hydro
and
cable to cable.
One of them is a little bigger if I remember right.

 

only differance is the disc. pp and flywheel are the same

-joseph

 

my friend used a hydro clutch in a cable ls tranny and it worked/works fine

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by efcivic12 &raquo;</TD></TR><TR><TD CLASS="quote">i have a 1990 ef with a ls motor and i have the cable trans and supposedly a hydro clutch in it is this possible and is this safe</TD></TR></TABLE>

yeah as long as the tranny you have is 92-93..92-01 b-tranny use same clutch but different throwout bearing..if you got 90-91 tranny you gotta use 90-91 clutch

 

ok thanx guys

 

90-91 same spline count but thinner, the 92+ discs are all the same hydro or cable and they will fit over the 90-91 input shaft but can damage the shaft because of the loose fit...as for the flywheels its the same 90-91 have different flywheels and 92+ are all the same

 

back from the dead!!how noticeable is the play when you put 92 plus plate on a 90 91 tranny???

 

^^^Shouldn't even fit. Different splines I thought?

 

they will fit. but the 90 91 plate will not fit on the 92+ tranny