vtec problem
05-21-2005, 09:44 PM
#1
Junior Member
Thread Starter
Join Date: Jan 2004
Location: Raleigh, NC, united states
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
vtec problem
Hey whats up guys...i recently did a b16a swap in my 95cx and my vtec is kicking in about 5800rpms..is that right or is it suppose to kick a little lower like 5200rpm..thats what i was told..it also doest feel like its kicking in that hard..i have a CEL on im going to check the code tomarrow,so maybe that could be it... but let my know what you think..
05-21-2005, 10:00 PM
#4
Honda-Tech Member
Join Date: Jul 2003
Location: Orlando, fl, US
Posts: 5,103
Likes: 0
Received 0 Likes
on
0 Posts
Re: vtec problem (matthevelli)
even though u changed the tach out it could still be off. Also with that cel ur car may not be opening vtec. what ecu u running
05-21-2005, 10:03 PM
#5
Junior Member
Thread Starter
Join Date: Jan 2004
Location: Raleigh, NC, united states
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
Re: vtec problem (sohcvtec1995)
maybe but it still doesnt feel like it really pulls till like 7000rpm tach could be off anyway its a jdm b16a wiht a p30 ecu..you can hear it but like i said about 5800 rpm and doest really pull till 7000rpm
Thread
Thread Starter
Forum
Replies
Last Post
JasonST
Hybrid / Engine Swaps
3
08-29-2006 03:02 PM
JasonST
Honda Prelude
13
08-24-2006 05:08 PM
CimorelliCRX
Honda CRX / EF Civic (1988 - 1991)
2
01-19-2003 08:26 AM