cadeMFjohnson

i was doing some turbo maintenance, and i hooked everything back up, but tired from work and tired from working on my car after work, i accidently left the oil feed line to the turbo off. i idled down the driveway and turned around and my CEL light came on so i killed the car and popped the hood. found the problem. i hooked it up and added oil and the car is running fine but CEL still on!!! damn thing. code 22, vtec pressure switch. i bypassed my pressure switch over a year ago. my turbo oil feed line comes from where the switch used to be. what could be wrong here? car runs fine but no vtec obviously.

98civdx

unhook the battery to clear the ecu and see if it comes back.

cadeMFjohnson

was in the process of resetting via ecu fuse and i just installed it and success. thanks

cadeMFjohnson

nevermind. i drove for a few minutes and the problem reoccured.

cadeMFjohnson

redid the splice where i bypassed. will drive later and ask again if its still bad, right now its not coming on idling for fifteen minutes or so

brent eg

i need help my vtec quit working and have no idea why i re wired from the ecu and still nothing any ideas throwing codes 6 and 21