Eddie

I hate making threads asking for help but I'm having serious trouble with this thing.

My car overheated today and I'm trying to find out if my coolant fan is working. I'm trying to use the paper clip method on the switch but I can't get the bastard to unplug. Any suggestions would be greatly appreciated

pic for reference as to what I'm talking about.

NotARaCist

iTrader: (1)

Squeeze locking clip, pull off. Easy as. Are you actually squeezing the locking clip, or are you just trying to tug it off?

Eddie

FML! I've been feeling for those can't seem to find them.

NotARaCist

iTrader: (1)

From the angle that pic is taken, see how the bottom has kind of a trapezoidal bit? The clip is literally RIGHT there.

Eddie

Got it thanks man. Well the paper clip turned the fan on. So now to check the cooling fan switch connector or the thermo is bad.

NotARaCist

iTrader: (1)

Resistance testing with a voltmeter should make it easy to figure out which is the problem.

Eddie

Need to get my hands on one and I'll check back. Thanks again.

Eddie

Decided to just remove Thermo. Is this even worth testing? Looks like the rubber piece is done for.