ProBlackHawk

If I was to get the 70mm OMNI THROTTLE BODY would it work on the stock GSR IM? I would also port match the throttle body to the IM.

doood

iTrader: (1)

yes. but why? what other mods do you have? 70mm is pretty big.

ProBlackHawk

I have full exhaust cold air and a custom tune if you think smaller would be better. I planning on getting cams and skunk2 IM in the near future.

jbpnoman

It would work, but it would do about as much good as **** on a mule.

doood

iTrader: (1)

money is better spent elsewhere

grumblemarc

iTrader: (4)

Custom tune? Tuned on what? On what car? On what ECU?

ej94coupe

I have a 96 JDM GSR,and I installed the Skunk2 IM, all of the hoses are connected except for the small hose that is under the distributor cap. I am not sure where that hose goes. If someone could please help. I would like to have my car running soo. Honda Day is near!!!
Can some please help me!

speedjunkie_g35

Don't tread jack it is rude!!! A Haynes or Chilton will help you, so go buy it!

ej94coupe

As i mention in a previous post i am new to this site and i am not to sure how to use it. but thanks for helping with that. Is there anyone on here that will be willing to provide me with assistance with my problem? I already have the Hanes booklet, and it still has not solved my problem

speedjunkie_g35

Well as a newb your best off taking a little time to read the FAQ and quit tread jacking!!!! If you still can't figure you problem out after doing a little reading then create your own thread for your questions