JDMSHIT ECU
#1
Thread Starter
Join Date: May 2006
Location: tulsa, OK, U.S.
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
JDMSHIT ECU
heres a list of their ecu and programs, http://jdmshit.com/ecu/index.html
i have a jdm h22a in my cx hatch
it has all the boltons and im getin crower stage 2 cams
would any of these ecus be good for this setup? or do i need to have a stock one fine tuned to my exact engine on a dyno? thanks for the help
i need help fast gotta buy something tommorow
i have a jdm h22a in my cx hatch
it has all the boltons and im getin crower stage 2 cams
would any of these ecus be good for this setup? or do i need to have a stock one fine tuned to my exact engine on a dyno? thanks for the help
i need help fast gotta buy something tommorow
#5
Junior Member
Join Date: Apr 2007
Location: west palm beach, us
Posts: 780
Likes: 0
Received 0 Likes
on
0 Posts
Re: (tulsa_ej1)
its kind of a cheaper route if you don't have extra money to find a tuner and for dyno time. they work but dont allow the full potential of your motor to shine.
#6
Thread Starter
Join Date: May 2006
Location: tulsa, OK, U.S.
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
so i daily drive and want my cams to perform well, maybe see a good 200whp, which i think is very achievable with h22 boltons and cams, would these ecus be good for that? and which one in the link woullld work best with my setup?
thanksfor all the responses so far
thanksfor all the responses so far
Trending Topics
#9
Junior Member
Join Date: Apr 2007
Location: west palm beach, us
Posts: 780
Likes: 0
Received 0 Likes
on
0 Posts
Re: (tulsa_ej1)
its up to you. if you want the best out of it try to find someone that can tune your car and they can burn a customn chip for you. most of those chips they sell i think just change your redline and lower vtec. i think they eliminate knock sensor also and give slight better fuel curves and whatnot. im not 100% but i think thats what they are
#10
Junior Member
Join Date: Apr 2007
Location: west palm beach, us
Posts: 780
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Mr.EM1_EK)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tulsa_ej1 »</TD></TR><TR><TD CLASS="quote">it already has retainers and springs, i have a **** uberdata tuned p28</TD></TR></TABLE>
whats wrong with that
whats wrong with that
#11
Thread Starter
Join Date: May 2006
Location: tulsa, OK, U.S.
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
well if youve seen my oher thread in this section, my ride is runnin slow for sum reason i can barely pull a stock rsx everyone tells me its my ecu, so i want to get cams and an ecu
#14
Thread Starter
Join Date: May 2006
Location: tulsa, OK, U.S.
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
hmmm never thot about it like that, would a retune on uberdata fic that, and if im already uberdata tuned do i just need to find a tuner whos good with uberdata?
Thread
Thread Starter
Forum
Replies
Last Post