Installing Tein Basics....good height setting?
06-06-2007, 07:37 PM
#1
Junior Member
Thread Starter
Join Date: Aug 2006
Location: MI
Posts: 304
Likes: 0
Received 0 Likes
on
0 Posts
Installing Tein Basics....good height setting?
Hey guys...just installing my Tein Basic On my 96 Civic.
How many threads on the damper should i start out with as my height?
I have them set at the lowest point....will this work or is it too low?
38 offset wheel
How many threads on the damper should i start out with as my height?
I have them set at the lowest point....will this work or is it too low?
38 offset wheel
06-07-2007, 04:44 AM
#5
Junior Member
Join Date: Aug 2003
Location: Yorktown, Va
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Racing rice)
I have a 96 with the tein basics. I put it about 2/3 of the way down and had no problems and didn't even have to roll the fenders. Not sure how it will work with your offset tho.
06-07-2007, 06:11 AM
#6
Ek Forever y0!
Join Date: May 2005
Location: Beating people with a stick, GA
Posts: 16,712
Likes: 0
Received 6 Likes
on
6 Posts
Re: (PhantomLord)
It's going to be personal preference, start from the top and lower i until you like it.
I promise the lowest those will go you probably won't like.
I promise the lowest those will go you probably won't like.
Trending Topics
That's why I always recommend starting from the top.. It doesn't really matter though, you'll end up at the same point eventually. 
Thread
Thread Starter
Forum
Replies
Last Post