lalocivic

i have a d16z6 with i/h/e chipped p28 skunk2 mani and 60mm throttle?i know its not much just wondering?

Corksil

good lulz. how the fudge are the interwebs supposed to estimate this number accurately....?

My recommendations would be find a d00d with a dyno and check it out for yourself, and if all else fails try the butt-dyno and add 15hp for e-***** reasons.

Corksil

on second thought, take base HP from stock d16 and add 6-8hp...

300whpej

id say take the stock numbers and subtract 5-10hp depending on the age/conditon of your motor and the tune (or lack of)

C Dubya

really hard to tell but ill guess 115whp max.

126ish stock minus .15% since thats crank HP.

IDK about you guys but a lot of shops around here have monthly 20-30 dollar dyno days.

turbo12a

104whp

D Griff

260 WHP.

hannslebo

115ish....like the other guy said depending on the condition of the motor itself.

just get it dyno'd my local shop only charges 45 dollars for 3 pulls.

Corksil

not more than 683hp...

not less than 69hp

Gunmetal_B20_Hatch

iTrader: (9)

In all honesty... probably around 115-120whp on a good cold day.

emoran05

these engines come stock with 125 hp so id say urs is making less since u screwed around with the intake and that chipped ecu wont help either

92shade

x2

mortificationrock

Yeah and thats why everyone else chips their ecu's....NOOB.

Another nOOB>

OP, i say take it to a dyno and remove all doubt. Dont expect a beast its a D. I have nothing against D's i own one. Ive also had a GSR ek. So i know both worlds. Just dont let other people put you down.

I personally have a d16z6 with i/h/e fidanza wheel,stage 2clutch,bpi velocity stack and a chipped ecu. I dont care how much im making. Its my FUN toy turtle car...LoL. Plus i added suspension and other functional stuuf to compensate for power...LoL

raidacaipo

sweety pie.. TUNE DYNO TUNE DYNO!!

raidacaipo

True that.. honestly Its more fun to drive a slow car fast then a fast car slow.. I have an h2b in my civic now but I cant even take off without my tires spinning. but the gsr and the d16y8 was fun though in my opinion.

300whpej

since when to chipped ecu's provide instant horsepower? a larger throttle body with stock injectors, and stock plugs/wires is like pissing in the wind with your eyes closed. a bone stock z6 with a virgin p28 is already at least 15 years old, and would be lucky to see 115whp. a chipped ecu (im guessing for da strooonga vtaksz and rice step) and a slightly larger tb isnt gonna put down 110whp. im not attempting to bash the op in anyway, but mods with a tune to support them take away hp. i know a guy with a rebuilt b16a2, 3inch intake, comptech header, and 2.5" exhaust who struggled to put down over 140whp...really nice/quality mods, but no tune.

92shade

you must be one of those guys that wants a 10000 rev limit and vtec engagement at 3500 rpms cuz its mad tyte so u buy a spoon chip on ebay. right?

civicjunkie17

iTrader: (1)

probably around 400,000whp

00EckoSI

what a comedian....

Del Namco Solo

120hp (stock) minus milage and engine wear (depends on how many miles) and then add like 10hp.

I estimated my 131k mile d16z6 @ ABOUT 95hp and about 77tq. (its old and worn i Know, am re-building) and now I'd say it makes 105hp and about 89tq (with my light mods). Never tuned never dyno'd, its a guesstimate!

Best thing to do is go to a cheap dyno and get a base run. Should be like 90 if you find a decent tuner garage (my friend only charges 90 for 1 run no tuning no adding parts, just 1 clean run)

emoran05

i didnt want to get that technical but thats wat i meant to say in the above post. if u want to remove all doubt just dyno it and let us know

owneyboy

iTrader: (1)

105whp max

Luke G.

how about instead of asking a dumb question that no one on here knows, Just stick the car on a dyno and you have your numbers, though they wont be anything to special.

MonkeyMagic

a **** hair over 100whp.

srsly.

BEAT_UP_EK

OP you SHOULD go to the dyno and comeback here. To put an end to this madness...