D16Z6 DYNO GRAPH AND 121MPH TIME SLIP
11-02-2005, 11:51 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2005
Location: easton, md, usa
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
D16Z6 DYNO GRAPH AND 121MPH TIME SLIP
AS IT SAYS...
DYNO
http://turbod16.com/album_page.php?pic_id=2986
TIME SLIP....
http://turbod16.com/album_page.php?pic_id=2982
http://turbod16.com/album_page.php?pic_id=2980
DYNO
http://turbod16.com/album_page.php?pic_id=2986
TIME SLIP....
http://turbod16.com/album_page.php?pic_id=2982
http://turbod16.com/album_page.php?pic_id=2980
11-02-2005, 11:55 AM
#3
* B A N N E D *
Join Date: Sep 2005
Location: nothing left inside in, Maryland
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Re: D16Z6 DYNO GRAPH AND 121MPH TIME SLIP (civic93@8psi)
big mike holdin it down quickwhips styleee boyyyyyyy 
good job mike, not sure if you remember me.. had the orange integra.
good job mike, not sure if you remember me.. had the orange integra.
Trending Topics
11-02-2005, 12:50 PM
#9
Member
Re: (fast88std)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fast88std »</TD></TR><TR><TD CLASS="quote">Or are you spinning too much off the line?
</TD></TR></TABLE>
that's a solid 60' for street tires. Impressive times, whats the car weigh?
</TD></TR></TABLE>
that's a solid 60' for street tires. Impressive times, whats the car weigh?
11-02-2005, 01:03 PM
#10
Honda-Tech Member
Thread Starter
Join Date: Sep 2005
Location: easton, md, usa
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
Yeah i remember you ....orange teggie...............
im on bfg's
the car weighs ~2450-2400lbs w/ me in it . all the hp calcs say for me to run120 in the 1/4 i need 2 make 320-330 whp but thats not true ,now is it
i weigh almost 300lbs(287)
d16z6 besides y8 mani, 7 lb flywheel, xtr6, pistons, and rods shes stock with a ssac turbo kit @ 14psi and a quickwhips 45 min street tune on crome [darkwingduck81]
-mike
im on bfg's
the car weighs ~2450-2400lbs w/ me in it . all the hp calcs say for me to run120 in the 1/4 i need 2 make 320-330 whp but thats not true ,now is it
i weigh almost 300lbs(287)
d16z6 besides y8 mani, 7 lb flywheel, xtr6, pistons, and rods shes stock with a ssac turbo kit @ 14psi and a quickwhips 45 min street tune on crome [darkwingduck81]
-mike
11-02-2005, 01:13 PM
#12
Honda-Tech Member
Join Date: Apr 2003
Location: CDA, ID
Posts: 8,312
Likes: 0
Received 0 Likes
on
0 Posts
Re: (z6)
hmm makes me feel like a bad driver
my car last year was 2400 w/o me 2550 with
built z6 with y8 manifold
Lovefab SST and garrett 50 trim
on hondata i made 244 whp on 10-11 lbs
on 17lbs i ran 12.8@116 on 215/50/14 bfg's and a 2.1 60'
i figured on 17lbs i was about 280-300whp area
props to you man!!!!
my car last year was 2400 w/o me 2550 with
built z6 with y8 manifold
Lovefab SST and garrett 50 trim
on hondata i made 244 whp on 10-11 lbs
on 17lbs i ran 12.8@116 on 215/50/14 bfg's and a 2.1 60'
i figured on 17lbs i was about 280-300whp area
props to you man!!!!
11-02-2005, 01:17 PM
#13
Honda-Tech Member
Thread Starter
Join Date: Sep 2005
Location: easton, md, usa
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
Re: (z6)
205/50/14 bfg drag radials
d16z6 9.0.1 comp srp slugs. eagle rods stock head ,kms block guard, ssac t3/t4 57 trim .50compressor .63a/r exhaust fidanzza 7 lb flywheel, act xtr6 clutch, walbro 195lph in tank , 550 denso injectors, d16y8 intake mani, ssac 12x27x3.5([i think]not real sure on fmic specs) ,stock z6 trannie, ssac wastegate and thats all folks
-mike
d16z6 9.0.1 comp srp slugs. eagle rods stock head ,kms block guard, ssac t3/t4 57 trim .50compressor .63a/r exhaust fidanzza 7 lb flywheel, act xtr6 clutch, walbro 195lph in tank , 550 denso injectors, d16y8 intake mani, ssac 12x27x3.5([i think]not real sure on fmic specs) ,stock z6 trannie, ssac wastegate and thats all folks
-mike
11-02-2005, 01:31 PM
#14
Honda-Tech Member
Join Date: Apr 2003
Location: CDA, ID
Posts: 8,312
Likes: 0
Received 0 Likes
on
0 Posts
Re: (civic93@8psi)
i just looked at my timeslip
same 60', i also ran a 8.4 1/8 but at 90mph
my 1000 ft was 10.8 vs your 10.6
damn that thing must move on the top end
same 60', i also ran a 8.4 1/8 but at 90mph
my 1000 ft was 10.8 vs your 10.6
damn that thing must move on the top end
11-02-2005, 02:36 PM
#15
dAng!
iTrader: (1)
Join Date: Jun 2001
Location: alabama/florida
Posts: 7,645
Likes: 0
Received 0 Likes
on
0 Posts
Re: D16Z6 DYNO GRAPH AND 121MPH TIME SLIP (civic93@8psi)
ssac - S S Auto Chrome. Ebay special? Falls apart at will without prior notice?
nice.
ps, keep a close watch on your engine bay.
nice.
ps, keep a close watch on your engine bay.
11-02-2005, 02:41 PM
#16
Bounty - € 8,000,000
Join Date: Apr 2004
Posts: 4,031
Likes: 0
Received 0 Likes
on
0 Posts
Re: D16Z6 DYNO GRAPH AND 121MPH TIME SLIP (Russ713)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by civic93@8psi »</TD></TR><TR><TD CLASS="quote">205/50/14 bfg drag radials
d16z6 9.0.1 comp srp slugs. eagle rods stock head ,kms block guard, ssac t3/t4 57 trim .50compressor .63a/r exhaust fidanzza 7 lb flywheel, act xtr6 clutch, walbro 195lph in tank , 550 denso injectors, d16y8 intake mani, ssac 12x27x3.5([i think]not real sure on fmic specs) ,stock z6 trannie, ssac wastegate and thats all folks
-mike</TD></TR></TABLE>
makes sense with drag radials.. get rid of thas SS Autochrome stuff for more reliable stuff and get back out there and show us some vids.
keep checking that SS Auto Turbo, because mine blew its seals recently and after a rebuild it works fine.
d16z6 9.0.1 comp srp slugs. eagle rods stock head ,kms block guard, ssac t3/t4 57 trim .50compressor .63a/r exhaust fidanzza 7 lb flywheel, act xtr6 clutch, walbro 195lph in tank , 550 denso injectors, d16y8 intake mani, ssac 12x27x3.5([i think]not real sure on fmic specs) ,stock z6 trannie, ssac wastegate and thats all folks
-mike</TD></TR></TABLE>
makes sense with drag radials.. get rid of thas SS Autochrome stuff for more reliable stuff and get back out there and show us some vids.
keep checking that SS Auto Turbo, because mine blew its seals recently and after a rebuild it works fine.
11-03-2005, 09:38 AM
#20
Junior Member
Join Date: Nov 2004
Location: Go fock YourSelf, lane, come and see me
Posts: 500
Likes: 0
Received 0 Likes
on
0 Posts
Re: (civic93@8psi)
badass dyno sheet and badass times
what kind of cash do you have invested in that set up?? ballpark figure
i miss my turbo D
what kind of cash do you have invested in that set up?? ballpark figure
i miss my turbo D
11-03-2005, 01:00 PM
#25
Honda-Tech Member
Thread Starter
Join Date: Sep 2005
Location: easton, md, usa
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
$4500-5000
into whole car (every detail of the car)
ie paint , car , rims , tires del sol seats, motor , pistons rods turbo kit, xm radio, gsr shift **** & shifter ,ect
EVERY THING
not to bad for the money in it huh?
into whole car (every detail of the car)
ie paint , car , rims , tires del sol seats, motor , pistons rods turbo kit, xm radio, gsr shift **** & shifter ,ect
EVERY THING
not to bad for the money in it huh?