how much do u think its worth?
07-19-2008, 07:41 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2006
Location: philadelphia, PA
Posts: 306
Likes: 0
Received 0 Likes
on
0 Posts
how much do u think its worth?
Ok I have a 92 eg hatch and I wanna know how much u think its worth?
It has
Type r 5 lug conversion
Omnipower sport full coilovers
Gsr cluster
Built lsvtec motor
Jdm b16 trans with jdm type r lsd with final drive & gsr 5th gear
Ls black seats
I have a zex nitrous kit that isn't installed yet
I have the msd ignition setup that isn't installed yet (msd 6al, blaster coil 2...)
Spoon carbon fiber mirrors
Carbonfiber duckbill
Everything for the a/c is there I just gotta put on the compressor and its good
It has
Type r 5 lug conversion
Omnipower sport full coilovers
Gsr cluster
Built lsvtec motor
Jdm b16 trans with jdm type r lsd with final drive & gsr 5th gear
Ls black seats
I have a zex nitrous kit that isn't installed yet
I have the msd ignition setup that isn't installed yet (msd 6al, blaster coil 2...)
Spoon carbon fiber mirrors
Carbonfiber duckbill
Everything for the a/c is there I just gotta put on the compressor and its good
07-19-2008, 08:34 AM
#4
Honda-Tech Member
Thread Starter
Join Date: Oct 2006
Location: philadelphia, PA
Posts: 306
Likes: 0
Received 0 Likes
on
0 Posts
Re: how much do u think its worth? (Mikes2000civicsi)
I don't really want to part it out. Cause I don't wanna be left with a shell. Its a pretty quick car. I've beatin boosted b16, gsr, and ls. I damn near beat a boosted 240 with a sr swap boostin at 22psi. So its a quick car
07-19-2008, 08:59 AM
#6
Honda-Tech Member
Thread Starter
Join Date: Oct 2006
Location: philadelphia, PA
Posts: 306
Likes: 0
Received 0 Likes
on
0 Posts
Re: (rSol93)
Well its amixture of both. The head is port and polished skunk2 stage 2 cams, springs titanium retainers, skunk2 intake manifold, hondata gasket, edelbrok headers
The block has jdm b16 pistons shotpeened ls rods with arp rod bolts. Acl race bearings and a micropolished crank
Almost forgot. It got a fidanza 7.5lbs flywheel and a act 6 puck sprung clutch and heavy duty pressure plate, itr throttlebody. Jdm itr shift linkage and short shifter
The block has jdm b16 pistons shotpeened ls rods with arp rod bolts. Acl race bearings and a micropolished crank
Almost forgot. It got a fidanza 7.5lbs flywheel and a act 6 puck sprung clutch and heavy duty pressure plate, itr throttlebody. Jdm itr shift linkage and short shifter
07-19-2008, 09:03 AM
#7
Junior Member
Join Date: Apr 2008
Location: 256, AL, United States
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
Re: (92hatchboi)
It's also hard to say without seeing pictures
what does the body look like? any rust? any major dents/scrapes?
what kind of wheels are on it? are they in good condition with good tires?
all important stuff to tell/show when trying to sell
what does the body look like? any rust? any major dents/scrapes?
what kind of wheels are on it? are they in good condition with good tires?
all important stuff to tell/show when trying to sell
Trending Topics
07-19-2008, 09:15 AM
#9
Honda-Tech Member
Thread Starter
Join Date: Oct 2006
Location: philadelphia, PA
Posts: 306
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Mikej425)
It has the championship white type r wheels with the honda center caps not acura. It pretty much needs a hood. And I have blox lower control arms that I didn't put on yet
07-19-2008, 09:15 AM
#10
Honda-Tech Member
Re: (vannak_5415)
I wouldn't be surprised if you have little to no people interested in buying your car, unless you specifically let people know in your local import scene.
You would be way better off parting out the car, IMO.
You would be way better off parting out the car, IMO.
07-19-2008, 09:26 AM
#11
Junior Member
Join Date: Mar 2008
Location: hartselle, alabama, united states
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
Re: how much do u think its worth? (92hatchboi)
it worth what someone is willling to pay for it bro. you cant really set a value for cars like these, ive seen some with similar set ups and someone will buy it for 7000 just becasue he wants it to bad. and ive also seen some go for around 3 to 5 grand. with what you have, parting out the car wouldnt be a bad idea either.
07-19-2008, 10:42 AM
#14
Honda-Tech Member
Thread Starter
Join Date: Oct 2006
Location: philadelphia, PA
Posts: 306
Likes: 0
Received 0 Likes
on
0 Posts
Re: (4drkidd)
Makes me not even want to sel it. Ill probly just put more work into it and keep it cause I was thinkin about puttin a k swap into it
07-19-2008, 10:54 AM
#15
Honda-Tech Member
Join Date: Apr 2007
Location: nigeria
Posts: 2,756
Likes: 0
Received 0 Likes
on
0 Posts
Re: how much do u think its worth? (92hatchboi)
Its worth a lot more to you. Youll never get back what you put into it. Drive around someone elses car for a week or so and youll realize how much you like your car lol.
07-19-2008, 12:52 PM
#17
Honda-Tech Member
Join Date: Jan 2007
Location: Las Vegas, NV, USA
Posts: 679
Likes: 0
Received 0 Likes
on
0 Posts
Re: how much do u think its worth? (92hatchboi)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 92hatchboi »</TD></TR><TR><TD CLASS="quote">I don't like buyin built cars I like doin stuff from scratch</TD></TR></TABLE>
buy a built car and build it some more.. hhaha itll put it that much closer to perfection theres always more to do
buy a built car and build it some more.. hhaha itll put it that much closer to perfection theres always more to do
07-19-2008, 01:15 PM
#18
Junior Member
Join Date: Jun 2008
Location: Fresno, ca, USA
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Re: how much do u think its worth? (92hatchboi)
I say about 4k-5k, but if its clean and have a stock motor swap or a fully rebuild and reliable motor then its worth 6k+.
07-19-2008, 04:36 PM
#19
Honda-Tech Member
Thread Starter
Join Date: Oct 2006
Location: philadelphia, PA
Posts: 306
Likes: 0
Received 0 Likes
on
0 Posts
Re: how much do u think its worth? (93excivic)
The motor is freshly built and its very reliable probly has about 3000 miles on it and that's because I drove from philly to florida and back with no problems. And its all highway miles
07-19-2008, 07:40 PM
#20
Honda-Tech Member
Join Date: May 2007
Location: NJ, USA
Posts: 3,328
Likes: 0
Received 0 Likes
on
0 Posts
Re: how much do u think its worth? (92hatchboi)
You could do 1 of 2 things.
1)Find a young sucker you'd pay a premium for a pre-built car.
2) Keep it and buy a $4000 K swap complete changeover from hmotorsonline.com.
1)Find a young sucker you'd pay a premium for a pre-built car.
2) Keep it and buy a $4000 K swap complete changeover from hmotorsonline.com.
07-20-2008, 12:46 AM
#21
Honda-Tech Member
Join Date: Feb 2007
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Re: how much do u think its worth? (92hatchboi)
If you part it out, I call the Type r 5 lug conversion.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boost_V »</TD></TR><TR><TD CLASS="quote">1)Find a young sucker you'd pay a premium for a pre-built car.
</TD></TR></TABLE>
Lol, don't rip-off that lil dude.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boost_V »</TD></TR><TR><TD CLASS="quote">1)Find a young sucker you'd pay a premium for a pre-built car.
</TD></TR></TABLE>
Lol, don't rip-off that lil dude.
Thread
Thread Starter
Forum
Replies
Last Post
tek_civic
Forced Induction
12
02-03-2004 06:18 PM
