Which high pressure Power Steering hose do I need?
#1
Honda-Tech Member
Thread Starter
Join Date: May 2008
Location: Lusby, MD
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
Which high pressure Power Steering hose do I need?
Which high pressure Power Steering hose do I need? I am in the middle of swapping out my EK subframe for an EG/DC subframe. My car is a ’99 Civic with a B20 swap (currently it is Non-VTEC, but this summer I am going to install a B16 head). We used the original EK power steering pump for the swap.
Now, I am swapping in a DC subframe with an Integra Power Steering rack & pinion (my EK subframe was in bad shape).
After doing some research, I see that the Integra has used 2 different Power Steering pumps 94-97 (11mm) and 98-01 (14.4mm). Since I have a Civic EK power steering pump (14.4mm), I looked up the 98-01 Integra hoses and each motor has a different hose. So which of the 3 High Pressure hoses should I use: LS, GSR & Type R?
Now, I am swapping in a DC subframe with an Integra Power Steering rack & pinion (my EK subframe was in bad shape).
After doing some research, I see that the Integra has used 2 different Power Steering pumps 94-97 (11mm) and 98-01 (14.4mm). Since I have a Civic EK power steering pump (14.4mm), I looked up the 98-01 Integra hoses and each motor has a different hose. So which of the 3 High Pressure hoses should I use: LS, GSR & Type R?
Thread
Thread Starter
Forum
Replies
Last Post
98k20ex
Honda Civic / Del Sol (1992 - 2000)
29
09-30-2004 09:29 PM
boot machine 5000
Honda Civic / Del Sol (1992 - 2000)
1
06-10-2002 05:52 AM