longshot

the #1 cylinder is dead, so we put new injectors in it. and then it was still dead, so i took the spark plug out to make sure it was firing, and it is, but i didnt smell gas in the cylinder...
now heres the problem, the car is obd-2 to obd-1 and they had to wire in resistors? but i dont know how to check if its wiring or what.. so confused..

ty in advance

.dave

I would trace the wire back along the harness and check the connections. If they did a poor solder job the connection could be broken.

longshot

but the thing is, it gets power to the resistor side, before and affter the resistor, and i dont know, plus weve tried that.

z6hatchboy

try checking the rest of the injectors harness

.dave

Check the ground side if they put different injector clips on.

longshot

well... we just tried switch the wires around, tried puttin a new resistor in, but if you put a plug from a different cylinder on the dead cylinder it works fine...