headers b18
10-09-2005, 06:06 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2005
Location: nashville/fresno, tn/ca, Cambodia
Posts: 3,089
Likes: 0
Received 0 Likes
on
0 Posts
headers b18
ok i got a b18a1 and need a header quick and need ta noe if any b series headers will fit like a jdm headers
10-09-2005, 07:36 PM
#2
Join Date: Jul 2005
Location: Japan Direct
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Re: headers b18 (jdmboi86)
jdmboi you couldnt make any less sense in your statement. first off, your b18a is crap. secondly any b series header (its a header not headers, there is only one head) will fit up to any b series head, and third there is no difference between a usdm and a jdm header. lastly learn how to spell, its not that hard to type "need to know" instead of your gangster *** " need ta noe yo ****". you are also gay. 
10-09-2005, 07:44 PM
#3
Join Date: Jul 2005
Location: birmingham, al, usa
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Re: headers b18 (B18CR_EJ2)
jesus dude could you have been ne more of a **** loving,saladtossing,felcher,to this guy...he asked a simple question...dont be a dick just because someone may not know as much as you...im sure you were at that point at one time so give him a little slack! you dick heads like this shouldnt be allowed on here...
10-09-2005, 08:00 PM
#4
Join Date: Jul 2005
Location: Japan Direct
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Re: headers b18 (schroddam)
schroddam, thanks for sticking up for the ghetto queen... anyone who isnt aware that its a header, not headers should go learn the alphabet or multiply without using a calculator..... i guess you are big guy for stepping in and defending him... this is a forum not and anything an idiot says is subject to ridicule, just as i have done to you, *** clown 
10-09-2005, 09:40 PM
#5
Join Date: Jul 2005
Location: birmingham, al, usa
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Re: headers b18 (B18CR_EJ2)
ok well i understand that about the header(s) thing you ignorant *** because we all know it has to do with singular or plural u expletive...not mathmatics or with the alphabet maybe that is the way he wants to spell it i am sure u say/type words in ur own ways this isnt a resume we dont have to type perfect i mean honestly you read it didnt you and obviously you got it and btw try typing sumthing right if ur going to be picky about it "...not and anything an idiot says..."another thing y is his A1 crap for all we know ur EJ that ur mom and dad bought u is **** too
10-09-2005, 10:05 PM
#6
Member
Join Date: Jun 2005
Location: 49.4900N 96.8833W
Posts: 1,207
Likes: 0
Received 0 Likes
on
0 Posts
Re: headers b18 (jdmboi86)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdmboi86 »</TD></TR><TR><TD CLASS="quote">ok i got a b18a1 and need a header quick and need ta noe if any b series headers will fit like a jdm headers </TD></TR></TABLE>
Any B series header will fit on your engine just fine, although their length on the tailpipe end might differ. Are you looking just for a stock one for a swap, or an aftermarket one? What you need specifically will be determined by the car you have the engine in.
Just so you know, posting WTB stuff in technical forums isn't allowed. It may seem stupid and ****-ish (see avatar), but when there's over 150,000 members things can get out of hand very quickly. If you still have questions about which manifold in particular you need, feel free to ask here. When it comes time to buy it, look in the FS forum, or post what you want in the WTB forum.
Don't be deterred from this site by some of the responses you've been getting. This is by far the most comprehensive knowledge center for hondas on the internet, but it also attracts its fair share of children who like to feel important. You'll be harrassed less by them if you remember that you only have one head and thus one header, and v-tech is a phone (people get all bitchy about spelling vtec wrong).
Any B series header will fit on your engine just fine, although their length on the tailpipe end might differ. Are you looking just for a stock one for a swap, or an aftermarket one? What you need specifically will be determined by the car you have the engine in.
Just so you know, posting WTB stuff in technical forums isn't allowed. It may seem stupid and ****-ish (see avatar), but when there's over 150,000 members things can get out of hand very quickly. If you still have questions about which manifold in particular you need, feel free to ask here. When it comes time to buy it, look in the FS forum, or post what you want in the WTB forum.
Don't be deterred from this site by some of the responses you've been getting. This is by far the most comprehensive knowledge center for hondas on the internet, but it also attracts its fair share of children who like to feel important. You'll be harrassed less by them if you remember that you only have one head and thus one header, and v-tech is a phone (people get all bitchy about spelling vtec wrong).
Trending Topics
10-09-2005, 10:46 PM
#8
Honda-Tech Member
Thread Starter
Join Date: Jul 2005
Location: nashville/fresno, tn/ca, Cambodia
Posts: 3,089
Likes: 0
Received 0 Likes
on
0 Posts
Re: headers b18 (B18CR_EJ2)
ok u little bitch just cuz i didnt what ta spell all nice and **** dont mean **** ok i worked my *** of for this ******* swap after my eg got stolein last year ok "that i ******* bought not like ur white *** hoe mommy boys *** mothefucker and if u located in tenn say that smart **** again in my ******* face u *** hole i expletive u and what ur mom bought for u 
10-09-2005, 10:51 PM
#9
Member
Join Date: Jun 2005
Location: 49.4900N 96.8833W
Posts: 1,207
Likes: 0
Received 0 Likes
on
0 Posts
Re: headers b18 (jdmboi86)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdmboi86 »</TD></TR><TR><TD CLASS="quote">ok u little bitch just cuz i didnt what ta spell all nice and **** dont mean **** ok i worked my *** of for this ******* swap after my eg got stolein last year ok "that i ******* bought not like ur white *** hoe mommy boys *** mothefucker and if u located in tenn say that smart **** again in my ******* face u *** hole i expletive u and what ur mom bought for u </TD></TR></TABLE>
You're a moron. I edited my post cuz i was getting dragged into the **** flinging contest you guys love oh so much. Forget what I told you in my first post, as you are one of the children I was speaking of. Sometimes I wonder why I even try helping...
Modified by transpar_nt at 2:21 AM 10/10/2005
</TD></TR></TABLE>You're a moron. I edited my post cuz i was getting dragged into the **** flinging contest you guys love oh so much. Forget what I told you in my first post, as you are one of the children I was speaking of. Sometimes I wonder why I even try helping...
Modified by transpar_nt at 2:21 AM 10/10/2005
10-10-2005, 03:35 PM
#11
Honda-Tech Member
Join Date: Nov 2003
Posts: 8,963
Likes: 0
Received 0 Likes
on
0 Posts
Re: headers b18 (B18CR_EJ2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B18CR_EJ2 »</TD></TR><TR><TD CLASS="quote">i was going to not say anything else until you went ahead and forgot how spell almost every word in your reply... no i am not from "tenn" and no my mommy and daddy didnt by my car but yes, my dad does own japan direct and that is where i got my type r from... by the way to the moron who commented on how my ej is crap... its totalled you *** hole thats what R.I.P means... but thanks.. and no you do not have an eg civic you illiterate bastard, all of you h-t idiots use the jargon you picked up in your most recent issue of import tuner, go learn something ******</TD></TR></TABLE>
don't let the door smash your face on your way out bitch
don't let the door smash your face on your way out bitch
Thread
Thread Starter
Forum
Replies
Last Post