gsr into ek help
03-12-2010, 01:52 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2009
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
gsr into ek help
HElp!!! ok, i gotta 97 obd2 gsr motor into a 98 civic dx.
The car runs but idles at 2k at normal operating temp. Also needs gas to start but takes about 7-10 cranks. NO VTEC, and the car shuts off whenever it wants to when driving but would start back up in a few seconds.
Note:
Using the org. dx harness with a 97 gsr 0bd2a P72 ecu
did the 3 step wire into a 2 step pinned out on the ivac and by the ecu.
i unclip the "different color" wire on the crank sensor.
hooked up the knock sensor and the vtec in the correct places (FOR SURE)
Car runs like crap...what else am i missing?
The car runs but idles at 2k at normal operating temp. Also needs gas to start but takes about 7-10 cranks. NO VTEC, and the car shuts off whenever it wants to when driving but would start back up in a few seconds.
Note:
Using the org. dx harness with a 97 gsr 0bd2a P72 ecu
did the 3 step wire into a 2 step pinned out on the ivac and by the ecu.
i unclip the "different color" wire on the crank sensor.
hooked up the knock sensor and the vtec in the correct places (FOR SURE)
Car runs like crap...what else am i missing?
Thread
Thread Starter
Forum
Replies
Last Post
mortificationrock
Honda Civic / Del Sol (1992 - 2000)
4
05-02-2009 09:30 AM
AnclyT
Tech / Misc
5
07-22-2005 05:41 PM
