engine harnesses
#1
Junior Member
Thread Starter
Join Date: Jan 2007
Location: Newnan, Ga, USA
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
engine harnesses
Thats my motor...jdm b18 complete swap and all...
The motor is going into a 1998 Civic DX. Got all the brackets needed for the swap to be successful, but I ran across a site thats scaring me...
http://www.ff-squad.com/tech/w...8.jpg
^^ It says that a integra engine harness will not fit a civic harness...is this true? Also, I read that a jdm harness will not fit usdm, etc...
Someone please shine some light on my dilema...doing the swap myself with some friends thursday and hoping for a learning expirence...
i've searched and researched but nothing gave me a straight foward answer...
#2
Honda-Tech Member
Join Date: Jan 2006
Location: St. Augustine, fl, us
Posts: 456
Likes: 0
Received 0 Likes
on
0 Posts
easiest way to do this in my opinion is switch out the stock gsr intake manifold for a blox or skunk2 intake, like this- http://www.streamlineparts.net...d=260
then either use your dx harness and make the necessary changes, or find a 96-98 sohc vtec 5spd harness and use that.
then either use your dx harness and make the necessary changes, or find a 96-98 sohc vtec 5spd harness and use that.
#4
Junior Member
Thread Starter
Join Date: Jan 2007
Location: Newnan, Ga, USA
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Re: (x0!)
what would changing the intake manifold do to help ease the swap???
so, if i get a ex harness, the harness will fit my swap integra/jdm and all???
so, if i get a ex harness, the harness will fit my swap integra/jdm and all???
Thread
Thread Starter
Forum
Replies
Last Post
Bleed Black
Honda Civic / Del Sol (1992 - 2000)
3
08-30-2002 06:05 PM