d16y8 low/no compression in 2 cylinders
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2010
Location: Culpeper VA
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
d16y8 low/no compression in 2 cylinders
Hey everyone.
Here's where I'm at. One day I was driving and my car slowly lost power but wasn't knocking or anything, then it wouldn't even start anymore. I tested the compression and came up with 150-150-0-75. I tore the head off yesterday and the pistons/selves are fine no cracks. I spun the cam gear and one of the valves would stick sometimes in the cylinder with 75 psi but I couldn't see anything wrong with the one with 0. I didn't have any water/oil mixed and it never over heated. I took the head to get the valves fixed w/ new seals and everything. But does anyone have any idea what could have cause this or what could be wrong with #3 cyl?
Any help or inputs much appreciated and I have pictures of the pistons/selves if they'll help
Here's where I'm at. One day I was driving and my car slowly lost power but wasn't knocking or anything, then it wouldn't even start anymore. I tested the compression and came up with 150-150-0-75. I tore the head off yesterday and the pistons/selves are fine no cracks. I spun the cam gear and one of the valves would stick sometimes in the cylinder with 75 psi but I couldn't see anything wrong with the one with 0. I didn't have any water/oil mixed and it never over heated. I took the head to get the valves fixed w/ new seals and everything. But does anyone have any idea what could have cause this or what could be wrong with #3 cyl?
Any help or inputs much appreciated and I have pictures of the pistons/selves if they'll help
Thread
Thread Starter
Forum
Replies
Last Post
92, bad, civic, compession, compression, compresssion, comprssion, cylinder, cylinders, d16y8, honda, low, power, prelude, psi