d series part interchange question (specifically distro)
07-13-2003, 05:44 PM
#1
Junior Member
Thread Starter
Join Date: Jun 2003
Location: Bartlett, TN, USA
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
d series part interchange question (specifically distro)
i have SEVERAL problems going on with my car, so here it goeas
i just put a d16z6 in my ex, while i had a d15z1 (vtec-e) in it temporarily... i ended up having to use the distro from the z1, and now my car has a TERRIBLE miss. whats making it miss? are these distros interchangable? i know i have a big vacuum leak at the TB, due to a messed up gasket.
im running on the d15z1 ecu, and when i do, i can only go to 25 in first, 45 in 2nd and 70 in 3rd... why is this? if i put a dx/lx ecu in, it seems to rev higher.
by the way, im running a zex 59300 cam too..
if anyone can help me with these questions, thanks in advance!
i just put a d16z6 in my ex, while i had a d15z1 (vtec-e) in it temporarily... i ended up having to use the distro from the z1, and now my car has a TERRIBLE miss. whats making it miss? are these distros interchangable? i know i have a big vacuum leak at the TB, due to a messed up gasket.
im running on the d15z1 ecu, and when i do, i can only go to 25 in first, 45 in 2nd and 70 in 3rd... why is this? if i put a dx/lx ecu in, it seems to rev higher.
by the way, im running a zex 59300 cam too..
if anyone can help me with these questions, thanks in advance!
07-13-2003, 06:56 PM
#5
Junior Member
Thread Starter
Join Date: Jun 2003
Location: Bartlett, TN, USA
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
but would it cause the miss that im having? miss at all throttle positions and all speeds/rpms.. dont think its plus or plug wires, cause they are new
Trending Topics
07-17-2003, 07:55 AM
#8
Junior Member
Join Date: May 2003
Location: Two Rivers, WI, USA
Posts: 204
Likes: 0
Received 0 Likes
on
0 Posts
Re: (dynamicauto)
i'd sell it to you for 80, but it's the ecu for the automatic. i never changed it when i put the manual in and the only problem it had was throwing the DTC for the auto tranny lock up solenoid...if you can deal with that, it's yours. tell me where to ship!
07-17-2003, 12:34 PM
#9
Junior Member
Thread Starter
Join Date: Jun 2003
Location: Bartlett, TN, USA
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
im going to have to pass on it, since its auto... i just sold an auto p28 to a guy for 60 shipped... if you will do that, then ill take it...
Thread
Thread Starter
Forum
Replies
Last Post
ensang_phamily
Honda Civic / Del Sol (1992 - 2000)
14
05-31-2009 11:46 PM
DX Hybridizer
Hybrid / Engine Swaps
5
05-07-2003 04:26 PM