D17 Stock Header Removal - Stuck.
07-06-2014, 07:40 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2013
Location: South FL
Posts: 287
Likes: 0
Received 0 Likes
on
0 Posts
D17 Stock Header Removal - Stuck.
Trying to remove the stock header from the D17 head on my girls car and the far right
nut is stripped to all hell and there's extremely little room to get any kind of leverage
on it with a nut extracting socket.
There's no way I can fit a hammer or anything useful in to knock it in further.
I would try a chisel but I don't want to risk damaging or bending the bolt on
the head while I pound on it as it'd have to be hit from above rather than straight on.
Any suggestions?
nut is stripped to all hell and there's extremely little room to get any kind of leverage
on it with a nut extracting socket.
There's no way I can fit a hammer or anything useful in to knock it in further.
I would try a chisel but I don't want to risk damaging or bending the bolt on
the head while I pound on it as it'd have to be hit from above rather than straight on.
Any suggestions?
Thread
Thread Starter
Forum
Replies
Last Post
the.hamburglar
Tech / Misc
7
07-23-2005 09:44 PM