The Official EF Discussion Thread
Honda-Tech Member
Joined: May 2006
Posts: 377
Likes: 0
From: festus, missouri, usa
I hear all of you other guys on the weather. Since thanksgiving its been 70 out and today there is at least 3 inches of ice...not snow on my car and everything else. There is also at least that much snow on top of the ice. The ice is so heavy its weighing down our trees and breaking power lines. There is over a half million people without electric in the st louis area now. Its supposed to be 8 degrees tonite!
Honda-Tech Member
Joined: Dec 2004
Posts: 4,562
Likes: 0
From: Madison, WI, USA
Re: (magoo_lc1)
awesome. i vote all the midwest guys pack their cars and head west tomorrow morning. to be honest, the weather doesn't bother me. i have no trouble driving in snow. i used to have a dumped crx that went through the snow better than my 2wd truck.
Honda-Tech Member
Joined: May 2005
Posts: 2,829
Likes: 0
From: CFL, USA
Re: (civicandy)
I know some of you guys have pulled out the dash harness before, I need a little help with my wiring. Check it out https://honda-tech.com/zerothread?id=1825976
if anyone can help hit me up please.
if anyone can help hit me up please.
EFSS153
Joined: Oct 2004
Posts: 15,826
Likes: 1
From: Tornado Alley
Re: (xDEFTONESx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by xDEFTONESx »</TD></TR><TR><TD CLASS="quote">see that 70s era accord right there? i think the next big trend is going to be "vintage" civics and cvccs. all it is going to take is one HT meet and one photoshoot with a notable honda-tech member in a super clean 78-79 civic slammed on low offset equips and the rush will be on to buy your vintage bucket.
</TD></TR></TABLE>
Yeah, it's a '78 CVCC. It belongs to a friend of mine, he's planning on a mostly OEM resto. We're looking for wheels, but 4x120 are stupid rare. Mugen made some CF-48's for it, but not easy to come by. I only have one very small pic of them to prove they even exist. He wants to put the Weber carb kit on it and some little stuff here and there. It's got the rare optional hatch louver thing and even the oem floor mats in good condition. I hope it does take off, old school owns.
</TD></TR></TABLE>
Yeah, it's a '78 CVCC. It belongs to a friend of mine, he's planning on a mostly OEM resto. We're looking for wheels, but 4x120 are stupid rare. Mugen made some CF-48's for it, but not easy to come by. I only have one very small pic of them to prove they even exist. He wants to put the Weber carb kit on it and some little stuff here and there. It's got the rare optional hatch louver thing and even the oem floor mats in good condition. I hope it does take off, old school owns.
Honda-Tech Member
Joined: Dec 2004
Posts: 4,562
Likes: 0
From: Madison, WI, USA
Re: (NAallTheWAY)
i love the old stuff. i'd like to do an EA next. not as old as the cvcc, but still cool to me
there are literally zero rust free old hondas around here. i see an EA once in a blue moon that isn't rusted up. although yesterday i saw a civic wagon that looked like it came from the showroom
Modified by civicandy at 3:56 PM 12/1/2006
there are literally zero rust free old hondas around here. i see an EA once in a blue moon that isn't rusted up. although yesterday i saw a civic wagon that looked like it came from the showroom
Modified by civicandy at 3:56 PM 12/1/2006
Re: (NAallTheWAY)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NAallTheWAY »</TD></TR><TR><TD CLASS="quote">
Yeah, it's a '78 CVCC. It belongs to a friend of mine, he's planning on a mostly OEM resto. We're looking for wheels, but 4x120 are stupid rare. Mugen made some CF-48's for it, but not easy to come by. I only have one very small pic of them to prove they even exist. He wants to put the Weber carb kit on it and some little stuff here and there. It's got the rare optional hatch louver thing and even the oem floor mats in good condition. I hope it does take off, old school owns. </TD></TR></TABLE>
I'v seen some cf48's on a cvcc... looks okay. Forget weber, get mikuni! heh... more ef discussion only! i get like 500 emails tellin me i got someone postin in the "official ef discussion thread" and find other stuff posted.
makes me wish they had just one email per topic since the last time u visited the topic. make thing easier heh.
Yeah, it's a '78 CVCC. It belongs to a friend of mine, he's planning on a mostly OEM resto. We're looking for wheels, but 4x120 are stupid rare. Mugen made some CF-48's for it, but not easy to come by. I only have one very small pic of them to prove they even exist. He wants to put the Weber carb kit on it and some little stuff here and there. It's got the rare optional hatch louver thing and even the oem floor mats in good condition. I hope it does take off, old school owns.
</TD></TR></TABLE>I'v seen some cf48's on a cvcc... looks okay. Forget weber, get mikuni! heh... more ef discussion only! i get like 500 emails tellin me i got someone postin in the "official ef discussion thread" and find other stuff posted.
makes me wish they had just one email per topic since the last time u visited the topic. make thing easier heh.
EFSS153
Joined: Oct 2004
Posts: 15,826
Likes: 1
From: Tornado Alley
Re: (UltimX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by UltimX »</TD></TR><TR><TD CLASS="quote">I'v seen some cf48's on a cvcc... looks okay. </TD></TR></TABLE>
CVCC Accord or CVCC Civic? Because, the Civic was/is 4x100.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by UltimX »</TD></TR><TR><TD CLASS="quote">Forget weber, get mikuni! heh... </TD></TR></TABLE>
I'll mention it to him, he's the one doing the research and knows the specifics. Thx.
BTW, I put a deposit on some OEM EF9 replica side skirts and had Adam order them in. When they arrive I'll get some pics and we'll go from there.
Eww, I said replica.
CVCC Accord or CVCC Civic? Because, the Civic was/is 4x100.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by UltimX »</TD></TR><TR><TD CLASS="quote">Forget weber, get mikuni! heh... </TD></TR></TABLE>
I'll mention it to him, he's the one doing the research and knows the specifics. Thx.
BTW, I put a deposit on some OEM EF9 replica side skirts and had Adam order them in. When they arrive I'll get some pics and we'll go from there.
Eww, I said replica.
Honda-Tech Member
Joined: Aug 2003
Posts: 19,768
Likes: 0
From: gold rust on my mugen rims
Re: (xkagax)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by xkagax »</TD></TR><TR><TD CLASS="quote">I know some of you guys have pulled out the dash harness before, I need a little help with my wiring. Check it out https://honda-tech.com/zerothread?id=1825976
if anyone can help hit me up please.</TD></TR></TABLE>
oh damn, so you purchased the engine bay harness dash harness??
if so have fun..
I took one look at mine because I was thinking of doing the same thing but just switching all the wires inside and out but I sssllooowwwly changed my mind
if anyone can help hit me up please.</TD></TR></TABLE>
oh damn, so you purchased the engine bay harness dash harness??
if so have fun..
I took one look at mine because I was thinking of doing the same thing but just switching all the wires inside and out but I sssllooowwwly changed my mind
EFSS153
Joined: Oct 2004
Posts: 15,826
Likes: 1
From: Tornado Alley
Re: (NAallTheWAY)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by UltimX »</TD></TR><TR><TD CLASS="quote">Haha, it was an accord for u!</TD></TR></TABLE>
You don't happen to have any pics, would you?
You don't happen to have any pics, would you?
Honda-Tech Member
Joined: Mar 2004
Posts: 5,967
Likes: 3
From: San Diego, CA
Re: (Mr_CRX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr_CRX »</TD></TR><TR><TD CLASS="quote">Washed the bucket today, and snapped a few shots:
</TD></TR></TABLE>
new hood?
where are the motor shots?
</TD></TR></TABLE>
new hood?
where are the motor shots?
Re: (STREETWERKZ)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STREETWERKZ »</TD></TR><TR><TD CLASS="quote">new hood?
where are the motor shots? </TD></TR></TABLE>
Took off the Fiber Images one to rock this one for a while. I'll give the new owner an option of having the black hood, or the color matched one. Keeping the CF one for the new car.
motor shots? ummm.. the battery on the cam died
where are the motor shots?
</TD></TR></TABLE>Took off the Fiber Images one to rock this one for a while. I'll give the new owner an option of having the black hood, or the color matched one. Keeping the CF one for the new car.
motor shots? ummm.. the battery on the cam died
Honda-Tech Member
Joined: Mar 2004
Posts: 5,967
Likes: 3
From: San Diego, CA
Re: (Mr_CRX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr_CRX »</TD></TR><TR><TD CLASS="quote">
motor shots? ummm.. the battery on the single cam died
</TD></TR></TABLE>
motor shots? ummm.. the battery on the single cam died
</TD></TR></TABLE>
Re: (STREETWERKZ)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STREETWERKZ »</TD></TR><TR><TD CLASS="quote"> </TD></TR></TABLE>
I can take some more pics of the b18c1 just sitting here if you want ...
</TD></TR></TABLE>I can take some more pics of the b18c1 just sitting here if you want ...
Honda-Tech Member
Joined: Mar 2004
Posts: 5,967
Likes: 3
From: San Diego, CA
Re: (Mr_CRX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr_CRX »</TD></TR><TR><TD CLASS="quote">
I can take some more pics of the b18c1 just sitting here if you want ...
</TD></TR></TABLE>
can you please?
I can take some more pics of the b18c1 just sitting here if you want ...
</TD></TR></TABLE>can you please?
Honda-Tech Member
Joined: Aug 2003
Posts: 19,768
Likes: 0
From: gold rust on my mugen rims
Re: (LoSt is BlaCk)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LoSt is BlaCk »</TD></TR><TR><TD CLASS="quote">damn she is beautiful...i can't wait for some of the new creations to leave the Tatonka Garage in the future </TD></TR></TABLE>
who came up with that name
</TD></TR></TABLE>who came up with that name
EFSS153
Joined: Oct 2004
Posts: 15,826
Likes: 1
From: Tornado Alley
Re: (vega_box)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vega_box »</TD></TR><TR><TD CLASS="quote">
who came up with that name</TD></TR></TABLE>
Probably the chief.
who came up with that name</TD></TR></TABLE>
Probably the chief.
Honda-Tech Member
Joined: May 2005
Posts: 202
Likes: 0
From: ca, riverside
