ok so i got a d16a6 and i installed it into my car but it came with no dizzy so i used the one from my previous motor so i put on the dizzy just like that and tighten the 3 screws what i wanted to know is that could my timing be off just cause i put the dizzy on like that without adjusting with timing light

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kixcrx &raquo;</TD></TR><TR><TD CLASS="quote">ok so i got a d16a6 and i installed it into my car but it came with no dizzy so i used the one from my previous motor so i put on the dizzy just like that and tighten the 3 screws what i wanted to know is that could my timing be off just cause i put the dizzy on like that without adjusting with timing light</TD></TR></TABLE>

Yes, your timing will be off. The engine will still run but not as good as it should.

 

YES

 

i knew it to check this timing is this the one where im suppose to go under the dash and do that thing with the paper clip and then loosen the 3 bolts from dizzy and point timing light to pulley and move the dizzy till it lines up with the line with the one on the plastic cover covering the timing belt

 

selling my crx. check my sig. bump if u can ..thanks. That red crx up there looks SEXY

 

yep rhd.. when i picked her up... it will be for sale after paint and its all runing. ef9 sir with rhd dash cuz it looks better then the civic dash i think http://www.flickr.com/photos/justjoey06/1368776356/

 

start a thread on that bad boy. /\/\/\/\

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Smokinsax &raquo;</TD></TR><TR><TD CLASS="quote">start a thread on that bad boy. /\/\/\/\</TD></TR></TABLE>

naw.. i dont take good photos lol

 

 

That is so siq, and different

 

 

^
hard

The first leg of a road race that took place two days ago in Newfoundland called Targa 2007

wet roads

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EF Junkie &raquo;</TD></TR><TR><TD CLASS="quote"></TD></TR></TABLE>
clean

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EF Junkie &raquo;</TD></TR><TR><TD CLASS="quote"></TD></TR></TABLE>
HELLA TYTE!

 

it was clean ....rust

 

^haha^

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EF Junkie &raquo;</TD></TR><TR><TD CLASS="quote">it was clean ....rust

]</TD></TR></TABLE>
sucks... still have the cage? i want it lol

 

I loved your car Junkie. I am about to do the same thing, for the same reason to my old beater hatch. In her prime fresh rustoleom! LOL

 

yea i miss it but too much rust...

ill be back soon even better still satin black...no shine

and the cage is sold

 

Mine to will also be a semi gloss/satin look soon. I just need to get the car running first. And now thanks to 1 fly si. That might be soon. I just got my car home tonight, and it has already started, unloading my car onto my street i had 2 cop cars wanting my registration and insurance. and wondering where the car came from and what it is doing here. Haha.

How i recieved the car almost a year ago as a roller, no bumpers, no trim, interior all removed but 90% there, no engine, missing and hack harnesses. Haha. I will have some new ones tomorrow. For now the old ones.







The most major rust on the car. Lower left. Other then that it is clean.

 

for satin black...im thinking of doing a satin grey or even pink on my next one

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EF Junkie &raquo;</TD></TR><TR><TD CLASS="quote"> for satin black...im thinking of doing a satin grey or even pink on my next one

</TD></TR></TABLE>


shut up


I'm still waiting on the can of "house of kolors" to be put to use

 

^^ tats beatiful !!

please post more pics of it?

 

another question does not having your timing set correctly make u lose power

 

Yes.