DB Squad.....for the Teggers with 2 extra doors
Honda-Tech Member
Re: (Db8skankz)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Db8skankz »</TD></TR><TR><TD CLASS="quote">
haha woot. do i get a number for DB-to-Evo squad </TD></TR></TABLE>
number one is all yours man hahaha
haha woot. do i get a number for DB-to-Evo squad </TD></TR></TABLE>
number one is all yours man hahaha
Honda-Tech Member
Join Date: Jan 2006
Location: Seymour Johnson AFB, USA
Posts: 1,303
Likes: 0
Received 0 Likes
on
0 Posts
Re: (EnjoyTheRideDC2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EnjoyTheRideDC2 »</TD></TR><TR><TD CLASS="quote">
Nope, they wont.
I dont even think they look alike when comparing them side to side.....Not to mention, the suspension geometry is off compared to the 94-01 integra spindle.
I think thats my final answer...No, they wont work correctly, which means in my eyes they wont fit.
Modified by EnjoyTheRideDC2 at 8:06 PM 7/15/2008</TD></TR></TABLE>
pretty much what i had figured, i just wanted to hear it from someone else i suppose
with that said, does anybody have a DS spindle/hub for a 94+ LS hanging out?
Nope, they wont.
I dont even think they look alike when comparing them side to side.....Not to mention, the suspension geometry is off compared to the 94-01 integra spindle.
I think thats my final answer...No, they wont work correctly, which means in my eyes they wont fit.
Modified by EnjoyTheRideDC2 at 8:06 PM 7/15/2008</TD></TR></TABLE>
pretty much what i had figured, i just wanted to hear it from someone else i suppose
with that said, does anybody have a DS spindle/hub for a 94+ LS hanging out?
Honda-Tech Member
Re: (Db8skankz)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Db8skankz »</TD></TR><TR><TD CLASS="quote">hahaha lol u sold ur evo?</TD></TR></TABLE>
yep a few months ago
yep a few months ago
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Aug 2003
Location: Left Coast : High Altitude, Top Floor
Posts: 7,616
Likes: 0
Received 1 Like
on
1 Post
Re: (shortycm17)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by shortycm17 »</TD></TR><TR><TD CLASS="quote">
(SPEC R) check quote below from 5.29.08
Quote, originally posted by shortycm17 »
vtec isnt **** neways doesnt increase the value of the car... im pretty sure ill get 10k out of it ... colorado people like to pay alot out here.....sold my 97 ek ls turbo basic setup for 8k last summer so 2k more for db is easy....
(SPEC R) CO is for ballers
hell ya CO is for ballas.... parted my turbo kit out for $3950 cause i couldnt get it to pass emissions with it on the car ... bout to sell the car this weekend for 6500 to this rich kid that has way too much money on his hands, ... told u vtec isnt **** and and I could get 10k out of the car ... now gonna buy me a s2k and go drifting in the colorado snow .... </TD></TR></TABLE>
Considering all this and the fact you're from CO yourself, its pretty safe to assume that you overpaid for your car and components. SO instead of getting PAID by selling your car to some kid BALLA, you're really just breaking even. Well, who knows how much you paid for the things you sold.
There's no reason to get any deeper into this... since no one can even verify any information that would be in question.
Finally, VTEC isn't really "****"... no one said it was. Its nice to have...if you dont agree, you obviously have not owned a vtec equipped car.
(SPEC R) check quote below from 5.29.08
Quote, originally posted by shortycm17 »
vtec isnt **** neways doesnt increase the value of the car... im pretty sure ill get 10k out of it ... colorado people like to pay alot out here.....sold my 97 ek ls turbo basic setup for 8k last summer so 2k more for db is easy....
(SPEC R) CO is for ballers
hell ya CO is for ballas.... parted my turbo kit out for $3950 cause i couldnt get it to pass emissions with it on the car ... bout to sell the car this weekend for 6500 to this rich kid that has way too much money on his hands, ... told u vtec isnt **** and and I could get 10k out of the car ... now gonna buy me a s2k and go drifting in the colorado snow .... </TD></TR></TABLE>
Considering all this and the fact you're from CO yourself, its pretty safe to assume that you overpaid for your car and components. SO instead of getting PAID by selling your car to some kid BALLA, you're really just breaking even. Well, who knows how much you paid for the things you sold.
There's no reason to get any deeper into this... since no one can even verify any information that would be in question.
Finally, VTEC isn't really "****"... no one said it was. Its nice to have...if you dont agree, you obviously have not owned a vtec equipped car.
Honda-Tech Member
Re: (EnjoyTheRideDC2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EnjoyTheRideDC2 »</TD></TR><TR><TD CLASS="quote">
Finally, VTEC isn't really "****"... no one said it was. Its nice to have...if you dont agree, you obviously have not owned a vtec equipped car. </TD></TR></TABLE>
I WANT VTEC
Finally, VTEC isn't really "****"... no one said it was. Its nice to have...if you dont agree, you obviously have not owned a vtec equipped car. </TD></TR></TABLE>
I WANT VTEC
Re: (EnjoyTheRideDC2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EnjoyTheRideDC2 »</TD></TR><TR><TD CLASS="quote">
You can do that.
The mudflaps do come with a hardware pack, but there is no part number for it. For the front, they utilize the same screws found on the fenderliner, just 2mm longer if you're really **** about those kind of things. For the rear bumper flap, you need six of this part number : 90121-SA7-000 </TD></TR></TABLE>
VERY helpful, thank you sir!
You can do that.
The mudflaps do come with a hardware pack, but there is no part number for it. For the front, they utilize the same screws found on the fenderliner, just 2mm longer if you're really **** about those kind of things. For the rear bumper flap, you need six of this part number : 90121-SA7-000 </TD></TR></TABLE>
VERY helpful, thank you sir!
Honda-Tech Member
Join Date: May 2005
Location: murrrrland
Posts: 13,296
Likes: 0
Received 0 Likes
on
0 Posts
Re: (SkyliteCustomz)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SkyliteCustomz »</TD></TR><TR><TD CLASS="quote">
I WANT VTEC </TD></TR></TABLE>
i want MIVEC
I WANT VTEC </TD></TR></TABLE>
i want MIVEC
B*a*n*n*e*d
iTrader: (15)
Re: (nathanong87)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nathanong87 »</TD></TR><TR><TD CLASS="quote">
i want VIAGARA</TD></TR></TABLE>
sounds like a personal problem
i want VIAGARA</TD></TR></TABLE>
sounds like a personal problem
Honda-Tech Member
Re: (nathanong87)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nathanong87 »</TD></TR><TR><TD CLASS="quote">
i want MIVEC</TD></TR></TABLE>
wth is MIVEC? lol
i want MIVEC</TD></TR></TABLE>
wth is MIVEC? lol
Honda-Tech Member
Join Date: May 2005
Location: murrrrland
Posts: 13,296
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Brice.Hayden)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SkyliteCustomz »</TD></TR><TR><TD CLASS="quote">
wth is MIVEC? lol</TD></TR></TABLE>
Mitsubishi Innovative Valve timing Electronic Control system
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Brice.Hayden »</TD></TR><TR><TD CLASS="quote">
sounds like a personal problem </TD></TR></TABLE>
your mom didn't think it was a problem lol jk
wth is MIVEC? lol</TD></TR></TABLE>
Mitsubishi Innovative Valve timing Electronic Control system
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Brice.Hayden »</TD></TR><TR><TD CLASS="quote">
sounds like a personal problem </TD></TR></TABLE>
your mom didn't think it was a problem lol jk
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Aug 2003
Location: Left Coast : High Altitude, Top Floor
Posts: 7,616
Likes: 0
Received 1 Like
on
1 Post
Re: (nathanong87)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nathanong87 »</TD></TR><TR><TD CLASS="quote">
your mom didn't think it was a problem lol jk</TD></TR></TABLE>
<FONT SIZE="6">Oh DAAAMN! HAhHHAhAHaHAHaH LOL.</FONT>
Always get a kick from a yo momma joke every once in a while.
your mom didn't think it was a problem lol jk</TD></TR></TABLE>
<FONT SIZE="6">Oh DAAAMN! HAhHHAhAHaHAHaH LOL.</FONT>
Always get a kick from a yo momma joke every once in a while.
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Aug 2003
Location: Left Coast : High Altitude, Top Floor
Posts: 7,616
Likes: 0
Received 1 Like
on
1 Post
Re: (StormsAcommin)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by StormsAcommin »</TD></TR><TR><TD CLASS="quote">
VERY helpful, thank you sir! </TD></TR></TABLE>
Glad I could help. Anytime.
VERY helpful, thank you sir! </TD></TR></TABLE>
Glad I could help. Anytime.
Honda-Tech Member
Join Date: May 2005
Location: murrrrland
Posts: 13,296
Likes: 0
Received 0 Likes
on
0 Posts
Re: (EnjoyTheRideDC2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EnjoyTheRideDC2 »</TD></TR><TR><TD CLASS="quote">
Always get a kick from a yo momma joke every once in a while. </TD></TR></TABLE>
they are timeless
Always get a kick from a yo momma joke every once in a while. </TD></TR></TABLE>
they are timeless
Honda-Tech Member
Re: (nathanong87)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nathanong87 »</TD></TR><TR><TD CLASS="quote">
i want MIVEC</TD></TR></TABLE>
over-rated
i want MIVEC</TD></TR></TABLE>
over-rated
Honda-Tech Member
Join Date: May 2005
Location: murrrrland
Posts: 13,296
Likes: 0
Received 0 Likes
on
0 Posts
Re: (JayWest)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JayWest »</TD></TR><TR><TD CLASS="quote">Those HX's or 4lug ITR's? </TD></TR></TABLE>
neither
neither
B*a*n*n*e*d
iTrader: (15)
Re: (EnjoyTheRideDC2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EnjoyTheRideDC2 »</TD></TR><TR><TD CLASS="quote">
Glad I could help. Anytime. </TD></TR></TABLE>
wish you would help me with those tail lights
Glad I could help. Anytime. </TD></TR></TABLE>
wish you would help me with those tail lights
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Aug 2003
Location: Left Coast : High Altitude, Top Floor
Posts: 7,616
Likes: 0
Received 1 Like
on
1 Post
Re: (Brice.Hayden)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Brice.Hayden »</TD></TR><TR><TD CLASS="quote">
wish you would help me with those tail lights</TD></TR></TABLE>
Wish you would've reminded me more...j/k. I'll box them and PM you tonight.
wish you would help me with those tail lights</TD></TR></TABLE>
Wish you would've reminded me more...j/k. I'll box them and PM you tonight.
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Aug 2003
Location: Left Coast : High Altitude, Top Floor
Posts: 7,616
Likes: 0
Received 1 Like
on
1 Post
Re: (JayWest)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JayWest »</TD></TR><TR><TD CLASS="quote">Those HX's or 4lug ITR's? </TD></TR></TABLE>
They're 4 lug ITR replicas. The same seller had some sick 5 lug ITR replicas a little while ago.
They're 4 lug ITR replicas. The same seller had some sick 5 lug ITR replicas a little while ago.