** The offical 96-00 civic 4dr thread ** PART 2
Honda-Tech Member
iTrader: (1)
Re: ** The offical 96-00 civic 4dr thread ** PART 2
There is definitely to much camber, especially on front wheel drive ****. Drift cars the more the merrier. When the wheel is a measurable 45 degrees and there is a bunch of window stickers that say "illest" and "fatlace" then it's time for an intervention.
Last edited by B20BP8R; 10-05-2013 at 04:25 PM. Reason: shitty gramar
Honda-Tech Member
iTrader: (2)
Honda-Tech Member
iTrader: (1)
Re: ** The offical 96-00 civic 4dr thread ** PART 2
@hifl: Even the passenger isnt happy with the choice.
My buddy hooked me up last night by chasing down my O2 sensor wiring fail, that the previous owner left for us. We also got BWR urethane shifter bushings installed with a short shifter. I got my OLD Sustec strut bar in there to. Next week is SPC rear camber kit, polk DB door speakers and Boston 6x9s for the rear. Also trying to find a decent set of BBS RS 14s off old E30s.
My buddy hooked me up last night by chasing down my O2 sensor wiring fail, that the previous owner left for us. We also got BWR urethane shifter bushings installed with a short shifter. I got my OLD Sustec strut bar in there to. Next week is SPC rear camber kit, polk DB door speakers and Boston 6x9s for the rear. Also trying to find a decent set of BBS RS 14s off old E30s.
Honda-Tech Member
iTrader: (1)
Join Date: Apr 2010
Location: California
Posts: 410
Likes: 0
Received 0 Likes
on
0 Posts
Honda-Tech Member
iTrader: (2)
Honda-Tech Member
iTrader: (1)
Join Date: May 2012
Posts: 1,533
Likes: 0
Received 0 Likes
on
0 Posts
Re: (portfl0w)
edit: then I realized you quoted a super old photo and I fixed your quote
Honda-Tech Member
iTrader: (1)
Re: ** The offical 96-00 civic 4dr thread ** PART 2
Somebody should get these before they are gone. I was holding out for my next set of orders, but I'm out of work while the Gubmint is shut down.
http://www.ebay.com/itm/310692719298...84.m1438.l2649
http://www.ebay.com/itm/310692719298...84.m1438.l2649
Re: ** The offical 96-00 civic 4dr thread ** PART 2
I have a 96 civic with a motor from2000 Integra ls it's a b18a1 & I need a new power steering pressure line hose . What would I buy it for a honda or Acura? Help!!! Send a link of one or ?? Someone help
Honda-Tech Member
iTrader: (1)
Join Date: May 2012
Posts: 1,533
Likes: 0
Received 0 Likes
on
0 Posts
Re: ** The offical 96-00 civic 4dr thread ** PART 2
Read with this thread if my information is wrong. Do some more research too. If you still can't find you answer (after trying your best) feel free to make a thread in the 92-00 Civic/Del Sol tech section.
https://honda-tech.com/forums/honda-civic-del-sol-1992-2000-1/faq-retaining-power-steering-ek-b-series-swap-1822781/
Last edited by CO671; 10-12-2013 at 04:21 PM.
Honda-Tech Member
iTrader: (1)
Join Date: May 2012
Posts: 1,533
Likes: 0
Received 0 Likes
on
0 Posts
Re: ** The offical 96-00 civic 4dr thread ** PART 2
Can somebody help a fellow sedan owner?
https://honda-tech.com/forums/honda-civic-del-sol-1992-2000-1/97-civic-sedan-measurement-3174373/
https://honda-tech.com/forums/honda-civic-del-sol-1992-2000-1/97-civic-sedan-measurement-3174373/
i have wreaked 97 civic sedan. can someone give me this measurement.
Under the hood looking at the strut threads sticking up from the wheel well. Measure from the left strut threads to the right strut threads, center to center.
let me know if you had to lay the tape measure over top the air intake or not. that way i can compare it to mine the same way. the reason is i was hit and think it may have bent the entire shock tower inward and need to know what to bend it out to.
thanks
Under the hood looking at the strut threads sticking up from the wheel well. Measure from the left strut threads to the right strut threads, center to center.
let me know if you had to lay the tape measure over top the air intake or not. that way i can compare it to mine the same way. the reason is i was hit and think it may have bent the entire shock tower inward and need to know what to bend it out to.
thanks
Honda-Tech Member
iTrader: (1)
Re: ** The offical 96-00 civic 4dr thread ** PART 2
OBDO1 integra / DA hose.
Read with this thread if my information is wrong. Do some more research too. If you still can't find you answer (after trying your best) feel free to make a thread in the 92-00 Civic/Del Sol tech section.
https://honda-tech.com/forums/showthread.php?t=1822781
Read with this thread if my information is wrong. Do some more research too. If you still can't find you answer (after trying your best) feel free to make a thread in the 92-00 Civic/Del Sol tech section.
https://honda-tech.com/forums/showthread.php?t=1822781