CRuNCHyEM1

i have 99si with b16a block JE8:1 compression pistons stock bore/sleeves,eagle rods,eagle block guard and arp headstuds n rod bolts/stock crank.750ccinj my head is a stock b18c gsr head. i had a t3/t4 57trim garret and the seals just blew out in it a couple days ago and im looking to get a new turbo and i was wondering what size and brand you guess recomend for my build.im looking for around 400whp. ive been looking at precision and borg warner.

sanman000719

the setup you have will do man take it to a proven tuner

CRuNCHyEM1

Yea def getting a good tune I'm gonna be running hondata s300. Am I gonna need a aftermarket map sensor?

civicjunkie17

iTrader: (1)

Yes hahahaha

azandford

yeah get a GM 3 bar....

CRuNCHyEM1

Thanks man that's what I was looking at on phearable.net. So does everyone think it's worth it to keep the turbo I have and get it rebuilt for the power I wanna make

CRuNCHyEM1

*needs rebuilt cause the seals are bad

EsotericImage

iTrader: (8)

if your low on funds, get an ebay turbo and use a restrictor until you get a name brand.. If you have the $$$, get the same size name brand. Bigger turbo isnt always better.

just my .02

CRuNCHyEM1

What size restrictor do i get?

TheShodan

iTrader: (14)

Check oil pressure at the line first. If getting ebay, god only knows if to use one or what size.

sneakysneaky

Rebuilding your current turbo would be the most prudent choice.
What exhuast housing do you have?

CRuNCHyEM1

Compressor.50 A/R. Turbine: .63 A/R