What rpm do you turbo guys lanch hear? Please let me know.
#1
Thread Starter
Join Date: Jun 2002
Location: yuba ciyty, ca, USA
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
What rpm do you turbo guys lanch hear? Please let me know.
Raced a stock gsr, yesterday and he got a huge jump on me because i launched at 3500, next time i am launching at 4500-5000, any ways let me know thanks. Oh yeah I am running 7 psi with the afc hack, but my turbo not making any boost tht might be it, too.
[Modified by therumblingteg, 2:08 PM 9/3/2002]
[Modified by therumblingteg, 2:08 PM 9/3/2002]
#4
Trending Topics
#8
Member
Join Date: Feb 2002
Location: woods cross, ut, usa
Posts: 1,810
Likes: 0
Received 0 Likes
on
0 Posts
Re: What rpm do you turbo guys lanch hear? Please let me know. (therumblingteg)
when I first launched on street tires(kumho) I dropped it a 5000 and spun tires all through 1st and 2cnd. If I were you on street tires I would launch around the 2500-3500 range and feather the clutch..works pretty well. OF course if your turbo isnt spoolin then it wont do you much good..
[Modified by tygsr, 5:08 PM 9/3/2002]
[Modified by tygsr, 5:08 PM 9/3/2002]
#9
Join Date: Jun 2002
Location: FT. Lauderdale, Florida, USA
Posts: 1,086
Likes: 0
Received 0 Likes
on
0 Posts
Re: What rpm do you turbo guys lanch hear? Please let me know. (therumblingteg)
did i read that first post right? your running 7psi and launched at 3500rpm and a STOCK gsr pulled on you? i hope you where spinning then thru 1st or the gsr launched at like 7000rpm with some slicks cuz stock gsr really dont pull hard thru 1st at all......
#10
Re: What rpm do you turbo guys lanch hear? Please let me know. (therumblingteg)
7000-7200rpms off the 2 step building approx 5 psi off the line. MT 24.5x8x13 slicks on Lensos, best 60ft is a 1.67 only once, usually low 1.7s.
#12
New User
Join Date: Dec 2000
Location: RAIDER NATION, CA, USA
Posts: 6,415
Likes: 0
Received 0 Likes
on
0 Posts
Re: What rpm do you turbo guys lanch hear? Please let me know. (G_Force_Si)
4000+ rpms? are you crazy?
im havin problems launching around 3000rpms as it is at 7psi.
im havin problems launching around 3000rpms as it is at 7psi.
#14
Thread Starter
Join Date: Jun 2002
Location: yuba ciyty, ca, USA
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
Re: What rpm do you turbo guys lanch hear? Please let me know. (VaporTrail)
i had leaks lots of them, and i fixed them. I was running 1 psi yesterday. But I raced him again, launched at 4500, and took him out at 7 psi, but not by how much i wanted too? How much should i be pulling him by. I had him in first second thinrd, and fourth, he just stoped is third cause i pulled him bad. I still lanch at 4500 on the street. OH YEAH ONE MORE THING I CHUTCH IS SHOT I MEAN IT IS SHOT.
#15
Honda-Tech Member
Join Date: Jun 2001
Location: NC, USA
Posts: 1,906
Likes: 0
Received 0 Likes
on
0 Posts
Re: What rpm do you turbo guys lanch hear? Please let me know. (tygsr)
when I first launched on street tires(kumho) I dropped it a 5000 and spun tires all through 1st and 2cnd. If I were you on street tires I would launch around the 2500-3500 range and feather the clutch..works pretty well. OF course if your turbo isnt spoolin then it wont do you much good..
#16
Thread Starter
Join Date: Jun 2002
Location: yuba ciyty, ca, USA
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
Re: What rpm do you turbo guys lanch hear? Please let me know. (Speed PHreak)
oh yeah i didnt lose to him i beat him by a foot last time when I said I lost.
#17
Junior Member
Join Date: Dec 2001
Location: enola, PA, USA
Posts: 404
Likes: 0
Received 0 Likes
on
0 Posts
Re: What rpm do you turbo guys lanch hear? Please let me know. (therumblingteg)
herm...on the street i'm launching at around 3500 on street tires(kumho) and i still get a bit of wheel spin, ek w/b18c1,...and u wanna launch at 4500-5000 on street tires with 7psi?
Thread
Thread Starter
Forum
Replies
Last Post