what the hell should i do!? please help out.
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2002
Location: St. Charels, MO
Posts: 901
Likes: 0
Received 0 Likes
on
0 Posts
what the hell should i do!? please help out.
hey guys, ive got a few questions. first of all, ive got a b16 with darton sleeves and i want it bored to 83mm with my new pistons. but i wanted someone from here that is VERY VERY reputable to do it. i also wanted someone on here to assemble it and balance it. i just dont have the time or the confidence right now. here is the setup:
b16 with darton sleeves
some sort of new pistons at 83mm
crower rods
prodrive oilpump gear
b16 head with skunk2 valves
skunk2 springs
skunk2 retainers
log mani
tial 35mm
3inch DP with cutout
uberdata
the turbo i bought from SOMEONE ON HERE (i wont mention any names) has in and out play, which is ******* bullshit because he told me it was fine and no play. *******.
it is a t3/t4 .48 exhaust and .50 compressor... the downpipe is have is make for this mani and turbo setup so i kinda wanted to not stray far from the pattern, alittle cut and weld is okay but not a shitton.
i wanted to make decent power, but the sc61 is just too much lag.
what do you all think of the sc44? sc50? anything?
cliff notes and questions:
who can i have machine and assemble my block?
what kinda turbo should i go with?
please give me some ideas and guidence. im an idiot.
b16 with darton sleeves
some sort of new pistons at 83mm
crower rods
prodrive oilpump gear
b16 head with skunk2 valves
skunk2 springs
skunk2 retainers
log mani
tial 35mm
3inch DP with cutout
uberdata
the turbo i bought from SOMEONE ON HERE (i wont mention any names) has in and out play, which is ******* bullshit because he told me it was fine and no play. *******.
it is a t3/t4 .48 exhaust and .50 compressor... the downpipe is have is make for this mani and turbo setup so i kinda wanted to not stray far from the pattern, alittle cut and weld is okay but not a shitton.
i wanted to make decent power, but the sc61 is just too much lag.
what do you all think of the sc44? sc50? anything?
cliff notes and questions:
who can i have machine and assemble my block?
what kinda turbo should i go with?
please give me some ideas and guidence. im an idiot.
#2
Honda-Tech Member
Join Date: Feb 2002
Location: SC61ville, Brooklyn, NY/TX, USA
Posts: 10,836
Likes: 0
Received 0 Likes
on
0 Posts
Re: what the hell should i do!? please help out. (2SLO)
I'm happy with the work done by Endyn in texas.
The Shop is owned by Larry, his web site is http://www.theoldone.com
Here's his resume
http://www.theoldone.com/about/default.asp
call the shop and ask for Josh or Larry and I'm sure they can give you an estimate, etc. Tell them your from Honda-tech.com
817-924-9334
The Shop is owned by Larry, his web site is http://www.theoldone.com
Here's his resume
http://www.theoldone.com/about/default.asp
call the shop and ask for Josh or Larry and I'm sure they can give you an estimate, etc. Tell them your from Honda-tech.com
817-924-9334
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
imationdawg
Forced Induction
13
11-13-2010 04:58 PM