What fuel components do I need?
#1
Honda-Tech Member
Thread Starter
Join Date: May 2004
Location: Dallas, TX, usa
Posts: 227
Likes: 0
Received 0 Likes
on
0 Posts
What fuel components do I need?
Okay this is for a B18b.
I've pretty much got everything thing on my list to finish my turbo kit, except for the fuel. this is what i have so far:
*HKS GT-SS turbo (T25 flange, int. wastegate, ball bearing)
*Hks Cast manifold
*Drag front mount ic
*custom ic piping
*Hks bov
*Hks Hi-power exhaust
*turbo lines etc etc....
What size injectors are sufficient for lets say running about 15-18 psi?
What fuel pump is best?
Any other fuel component besides those two?
After i get everything, i'm gonna get it dyno-tuned with hondata.
I only want about a good 320-350hp just a nice street car.
Also anyone know about how much it would cost to get a custom downpipe fabricated?
Thanks in advance!
I've pretty much got everything thing on my list to finish my turbo kit, except for the fuel. this is what i have so far:
*HKS GT-SS turbo (T25 flange, int. wastegate, ball bearing)
*Hks Cast manifold
*Drag front mount ic
*custom ic piping
*Hks bov
*Hks Hi-power exhaust
*turbo lines etc etc....
What size injectors are sufficient for lets say running about 15-18 psi?
What fuel pump is best?
Any other fuel component besides those two?
After i get everything, i'm gonna get it dyno-tuned with hondata.
I only want about a good 320-350hp just a nice street car.
Also anyone know about how much it would cost to get a custom downpipe fabricated?
Thanks in advance!
#2
Member
walbro 255lph high pressure fuel pump
at least 550cc injectors
stock lines
i dont know much about those turbos but from experience anything with a t25 flange is gonna have a hard time making over 300whp
at least 550cc injectors
stock lines
i dont know much about those turbos but from experience anything with a t25 flange is gonna have a hard time making over 300whp
Thread
Thread Starter
Forum
Replies
Last Post