What do I need to tune Hondata
06-09-2003, 06:10 AM
#1
Thread Starter
Join Date: Jan 2003
Location: Unknown Road, nC, us
Posts: 1,419
Likes: 0
Received 0 Likes
on
0 Posts
What do I need to tune Hondata
I have hondata s200 w/boost.I have a freind w/a dyno.What do I need to buy to tune the s200.I need to change ingnition map fuel map etc.I tried a search but came up w/nothing.
06-09-2003, 06:41 AM
#2
Member
Join Date: Feb 2002
Location: Lat Long 32.90 97.03
Posts: 1,144
Likes: 0
Received 0 Likes
on
0 Posts
Re: What do I need to tune Hondata (COLORPROS)
<U>Required</U>
RomEditor -- You need the RomEditor to write your own files.
EPROM Programmer to program the chips
<U>Optional</U>
Datalogger -- Will be useful to have the Datalogger to log your timing and fuel while on the dyno so you can analize later.
RomEmulator -- Make changes on the fly, and dont have to pull the chip out everytime to write the file to.
RomEditor -- You need the RomEditor to write your own files.
EPROM Programmer to program the chips
<U>Optional</U>
Datalogger -- Will be useful to have the Datalogger to log your timing and fuel while on the dyno so you can analize later.
RomEmulator -- Make changes on the fly, and dont have to pull the chip out everytime to write the file to.
06-09-2003, 07:43 AM
#5
Honda-Tech Member
Join Date: Feb 2001
Location: Tejas
Posts: 6,351
Likes: 0
Received 0 Likes
on
0 Posts
Re: What do I need to tune Hondata (COLORPROS)
you need ROM editor 3.0 and Pocket programmer.
you need the ROM editor to make changes based on your dyno runs and once you make all the changes, you need to transfer the file to the pocket programmer to burn it to a chip then you can insert the chip to the ECU
stan
you need the ROM editor to make changes based on your dyno runs and once you make all the changes, you need to transfer the file to the pocket programmer to burn it to a chip then you can insert the chip to the ECU
stan
Thread
Thread Starter
Forum
Replies
Last Post
MadVTI
Engine Management and Tuning
7
01-31-2009 10:59 PM
