Weird stuff... on my Benson Sleeves.
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2004
Location: Austin, Tx, usa
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
Weird stuff... on my Benson Sleeves.(
Have some crust on my sleeves. about 1 1/2 inches below deck height. It goes around all of the sleeves.
wondering if this is bad or just somethin' that should just be cleaned.
I just bought this thing last night. The sleeves were slightly twisted but have a friend that bought an old benson block with the same thing and his car runs fine. I didnt see the crust until this moring. Which is something I have never heard about.
Any insight would be great.
Click On pictures to enlarge..
Btw this is an old benson block..
wondering if this is bad or just somethin' that should just be cleaned.
I just bought this thing last night. The sleeves were slightly twisted but have a friend that bought an old benson block with the same thing and his car runs fine. I didnt see the crust until this moring. Which is something I have never heard about.
Any insight would be great.
Click On pictures to enlarge..
Btw this is an old benson block..
#3
Honda-Tech Member
Thread Starter
Join Date: Dec 2004
Location: Austin, Tx, usa
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
Re: Weird stuff... on my Benson Sleeves.( (boostismycrack)
yeah it is old... its flaking off thats the thing. there is some way down at the bottom. some even came out when i turn over the block?
How would I go about removing it?
How would I go about removing it?
#5
Re: Weird stuff... on my Benson Sleeves.( (boostismycrack)
Yea thats just some honda bond on there, It's fine. How is the copper ring on top? Maybe replace them with new ones so you get a better seal, since it's not assembled yet. Just a thought.
Trending Topics
#10
Honda-Tech Member
Thread Starter
Join Date: Dec 2004
Location: Austin, Tx, usa
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
Re: Weird stuff... on my Benson Sleeves.( (WillisGS)
that'll work. haha.
anyways. since its copper o-ringed what would be the max bore to the sleeves. I wanted to do 83? right now its stock 81 bore.
would that be possible.
also whats the best, step deck or flat deck.
anyways. since its copper o-ringed what would be the max bore to the sleeves. I wanted to do 83? right now its stock 81 bore.
would that be possible.
also whats the best, step deck or flat deck.
#11
Honda-Tech Member
Join Date: Oct 2003
Location: Hamburg/, Germany, Germany
Posts: 418
Likes: 0
Received 1 Like
on
1 Post
Re: Weird stuff... on my Benson Sleeves.( (b18tegg)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b18tegg »</TD></TR><TR><TD CLASS="quote">that'll work. haha.
anyways. since its copper o-ringed what would be the max bore to the sleeves. I wanted to do 83? right now its stock 81 bore.
would that be possible.
also whats the best, step deck or flat deck.</TD></TR></TABLE>
https://honda-tech.com/zerothread?id=1853111
anyways. since its copper o-ringed what would be the max bore to the sleeves. I wanted to do 83? right now its stock 81 bore.
would that be possible.
also whats the best, step deck or flat deck.</TD></TR></TABLE>
https://honda-tech.com/zerothread?id=1853111
Thread
Thread Starter
Forum
Replies
Last Post