Trying to get my car running. Wrote a basemap in uberdata. Car starts but runs real rough, pig rich. Check engine light goes on. When I check the code I get two long flashes and then a steady light, the code does not repeat. Is that right, I thought the code was supposed to repeat, but if not I guess I'm getting a code 20 which is "Electrical load detector". What does that mean?

Setup:
b18c5
p28 with uber
55lb injectors
3bar

 

I guess you are using a Canadian ECU? Most of them dont have ELD...disable it in Uber and see what happens.

 

I would say try a new map. What version of uberdata are you using?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 93turbo16 &raquo;</TD></TR><TR><TD CLASS="quote">I would say try a new map. What version of uberdata are you using?</TD></TR></TABLE>

Version 1.7R2

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by xenocron &raquo;</TD></TR><TR><TD CLASS="quote">I guess you are using a Canadian ECU? Most of them dont have ELD...disable it in Uber and see what happens.</TD></TR></TABLE>

Ya, ECU is canadian. I didn't even notice the ELD box in uber, thanks I'll give that a whirl.

 

Yep, disable the eld.

Did you start with a new map for version 1.7R2? It has different fuel modifiers in then the other versions, you have to start clean from a GSR map. My car did the same thing during testing it.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dr Pooface &raquo;</TD></TR><TR><TD CLASS="quote">Check engine light goes on. When I check the code I get two long flashes and then a steady light, the code does not repeat. </TD></TR></TABLE>

weird... try crome. if it does the same thing than i bet you have a hardware problem..

 

Reburned the chip with the ELD disabled. No CEL now, but crappy missing super rich idle. My basemap skillz need work.