water injection: use nitrous solenoid, jet, and fogger?
#1
Member
Thread Starter
water injection: use nitrous solenoid, jet, and fogger?
im building my race car setup and i would like to run water/alchohol injection. I have an old nitrous kit laying around that im not using.....
anybody have experience with getting a small tank and pump and running it to the solenoid and fogger/jet? think it would work?
Im thinking as long as the fogger/jet would atomize the liquid well enough it should work great...the trouble would be the experimentation phase in getting the correct jet/pressure/etc.
anybody have any thoughts on this?
anybody have experience with getting a small tank and pump and running it to the solenoid and fogger/jet? think it would work?
Im thinking as long as the fogger/jet would atomize the liquid well enough it should work great...the trouble would be the experimentation phase in getting the correct jet/pressure/etc.
anybody have any thoughts on this?
#2
Re: water injection: use nitrous solenoid, jet, and fogger? (91civicDXdude)
Nitrous nozzles are too big and do not give you the atomization you need, my system using them performed very poorly.
Honestly though, for a race car why bother? C16 and an air/water cooler will supress any and all detonation, there really isn't any need for it in a race car.
Honestly though, for a race car why bother? C16 and an air/water cooler will supress any and all detonation, there really isn't any need for it in a race car.
Thread
Thread Starter
Forum
Replies
Last Post
guessohw
Honda Civic / Del Sol (1992 - 2000)
1
01-24-2009 08:50 AM
madman13lm
Forced Induction
32
12-05-2002 04:40 AM