i read there was a trick to it so it will start right up....what is it????if you tell me to search......go look thru the 258 posts...also whats a good fuel pressure setting ????
i'm set at 52psi with vacuum hose off...thanks in advance
-b16
-drag3 kit
-walbro 255
-vafc
-b&m fpr
dsm 450s

 

i was runnin 40psi when i had the hack and it'd fire right up, warm or cold this was on an h22 tho

 

i was reading something on it in my afc hack search but after trying to find it again last night.......it just seems like there is no gas in it...takes a couple of times for it to fire

 

did you do the endyn mod to the b&m fpr, cause that will cause this

 

what is the endyn mod?????

 

drill a very small hole in the inside of the fpr. if you don't know what it is you prly don't have it done, so never mind on that

 

yeah dont have that one done...

 

all hack users have a hard time warm starting w/450s. just give it a lil gas, thats all u can do...

 

thanks for replies....do i need to let the pupmp prime then give it a lil gas then start?