Vortech FMU disk stamped inside?
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2001
Location: Northeast, USA
Posts: 6,030
Likes: 0
Received 0 Likes
on
0 Posts
Vortech FMU disk stamped inside?
Just wondering if the disks are labeled inside the FMU to tell me what disk I have in an install I did. I told the owner of the car to order an 8:1 disk (RC310's and 2 fuel pumps) for 10psi of boost but the car feels RICH even with base pressure set at 38psi (vacuum off) at 6-7 psi of boost.
#2
Honda-Tech Member
Join Date: Feb 2002
Location: Peoria, IL, USA
Posts: 1,835
Likes: 0
Received 0 Likes
on
0 Posts
Re: Vortech FMU disk stamped inside? (HybridKOOP)
No stampings. The calibration kit I ordered from vortech (with all the disks) didnt even have instructions explaining them. All I knew was the biggest one was 12:1 and the smallest is 4:1.
I have the others and the remainders are 6,8, and 10. Let me know the diameter and I'll tell you which one it is.
I have the others and the remainders are 6,8, and 10. Let me know the diameter and I'll tell you which one it is.
Thread
Thread Starter
Forum
Replies
Last Post
121, calibration, diameter, disc, discs, disk, fmu, fuel, install, instruction, instructions, kit, management, recalibration, unit, vortech